LicheeRV-Nano-Build
LicheeRV-Nano-Build copied to clipboard
sipeed
LicheeRV-Nano-Build
As you can see, if you shake a piece of paper around the camera, the screen can see changes, but this is very abnormal. How can we solve this? https://github.com/sipeed/LicheeRV-Nano-Build/assets/174139009/4abb5f03-cdc2-4708-9b0e-806c725b23e8...
### Problem Middleware build is failing. ### Environment Ubuntu Docker Container (from host/ubuntu) on M1 MacBook Air. ### Question(s) Should the "build all" command result in a completed image? I...
Hi, I have successfully built my own firmware using the Build. However, I do not need the RNDIS function, but I require USB storage devices (plugging in a usb flashdrive...
The Lichee RV nano + 7inch touchpanel (currently the only LCD available) displays images slowly. In release of the repository here, 2024-05-28-17-33-82a0b7.img.xz is framebuffer acceleration is disabled. Also, since the...
wiki.sipeed.com>LicheeRV Nano>Peripheral>7. Touch Screen https://wiki.sipeed.com/hardware/en/lichee/RV_Nano/5_peripheral.html There is the following description. ```` Connect the touchscreen ribbon to the board's touchscreen interface, paying attention to the wire sequence. Then execute: /opt/touch.sh #...
Hi, I would like to show the boot logs on the mipi LCD with frame buffer console, but I cannot get it working. I hv added the following in build\boards\sg200x\sg2002_licheervnano_sd\linux\sg2002_licheervnano_sd_defconfig:...
I have `LicheeRV Nano`, I installed Debian, I can ssh to it, but there is no `apt` or `dpkg`. How can I install software? Is there Ubuntu version available?
Hi, I have been trying to build A53 with defconfig of `defconfig sg2002_licheea53nano_sd` from this repo. But it ended up with build failure. i think It is failed in ramdisk...
