Help needed integrating 433Mhz switch

[JGJMatt]

Hi,

I apologise if this has already been asked, I would just like to know if anyone could help me with coding an ESP8266.

I want just 3 on/off switches but instead additional of tactile buttons to control them manually, I'd like to use 433mhz RF switches (the cheap ones you stick to your wall) and a 433mhz receiver (green 4-pin ones).

Any help would be greatly appreciated.

Like this but using Sinric Pro -> https://randomnerdtutorials.com/alexa-echo-with-esp32-and-esp8266/

https://i0.wp.com/randomnerdtutorials.com/wp-content/uploads/2018/03/esp8266-esp32-alexa-circuit.jpg?w=750&quality=100&strip=all&ssl=1

[kakopappa]

Check the comments in this thread.

[JGJMatt]

I'm sorry I'm a complete noob when it comes to coding is it possible to combine the <rcswitch.h> from this code below to the Sinric switch code? https://raw.githubusercontent.com/RuiSantosdotme/Random-Nerd-Tutorials/master/Projects/Alexa/ESP32_ESP8266_2_Devices.ino

[sivar2311]

Hi @JGJMatt !

From the example code from randomnerdtutorials I created a SinricPro example - see here

You would need to adjust the configuration (pins, rf-codes, wifi credentials, sinricpro credentials, sinricpro device-id's).

I haven't used the 433MHz receivers yet and didn't test the code (except for compiling it) - so: No guarantee ;)

[JGJMatt]

Hi @JGJMatt !

From the example code from randomnerdtutorials I created a SinricPro example - see here

You would need to adjust the configuration (pins, rf-codes, wifi credentials, sinricpro credentials, sinricpro device-id's).

I haven't used the 433MHz receivers yet and didn't test the code (except for compiling it) - so: No guarantee ;)

Thank you so much!

I'm just waiting for the RF module to arrive then I can test it out

[stale[bot]]

This issue has gone quiet. Spooky quiet. We currently close issues after 14 days of inactivity. It’s been at least 7 days since the last update here. If we missed this issue or if you want to keep it open, please reply here. As a friendly reminder, the best way to fix this or any other problem is to provide a detailed error description including a serial log. Thanks for being a part of the SinricPro community!

[stale[bot]]

Hey again! It’s been 14 days since anything happened on this issue, so our friendly robot (that’s me!) is going to close it. Please keep in mind that I’m only a robot, so if I’ve closed this issue in error, I’m HUMAN_EMOTION_SORRY. Please feel free to comment on this issue or create a new one if you need anything else. As a friendly reminder, the best way to fix this or any other problem is to provide a detailed error description including a serial log. Thanks again for being a part of the SinricPro community!