SubMarine
SubMarine copied to clipboard
simondankelmann
After setting everything up and succesfully uploading the sketch i get this message every second in Serial Monitor: _rst:0x8 (TG1WDT_SYS_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0030,len:4888 load:0x40078000,len:16516...
All wiring is good and all steps are done correctly but the device doesnt boot at all any help would be appreciated
I have made this project with the ESP32 D1 mini and the CC1101 (8 pin version), hence the wiring is somewhat different than the provided picture if I follow the...
I can't quite follow the schematics vs pinout table. For instance on the left side, following the yellow and orange wire, they correspond to GPIO14 (TMS) and GPIO11 (SD3) according...
My phone is a fully stock, up-to-date Samsung Galaxy S22 Ultra. The app works so far. I can connect to the ESP32 (AZ delivery NodeMCU board) and configure things. My...
App not scan bluetooth over than api 30 (android 11 ) I mean scan bluetooth not work with api 31 ,32,33,34 Please fix it
Since the latest update this phone will not find the device via Bluetooth device is working fine able to connect from my wife's phone which is much older in my...
Has anyone managed to make it work? The recording doesn’t work for me, it only records noise signals. I’ve also tried assigning different PINs to go0 but to no avail....
I am having problems with receiving 433.92 mhz signals of basic appliances that use the remote. I am just receiving background signals and not the remote. Also i cannot import...
Hi. First of all, thanks for this project, it is very interesting and fun to work with. I'm experiencing a problem with transmission. I'm using a NodeMCU ESP32-WROOM-32 (38 pin...
