AndroidDvbDriver
AndroidDvbDriver copied to clipboard
signalwareltd
Fail to get channel
Hello My tablette is a Nexus10 under Android 5.1.1 with a Pad TV tuner PT360 I have get the last version of the DVB-T driver. I have install the Aerial TV application I have configure the application for France The tuner never tune and scan finish with no channel. I use an external fix antenna . I have make the same try with PadTV HD and i get all the french channel. let me know if you need more information
Olivier
Hello Olivier,
Thanks for reporting this. This is indeed worrying.
To debug I would recommend figuring out the frequency of one of the local DVB muxes that you can receive fine with PadTV.
What you can try:
- Manual tuning in Aerial TV on that frequency.
- Using the advanced interface of the driver to confirm if any signal is detected on these frequencies. Also would be good to see things like mux speed and lost frames per second, all of which should be visible on the driver screen.
Regards, Martin
Hello Martin I finally get the channel list.
I can’t explain why it’s work this now.
May be it’s because I send the application in background. Maybe it’s because I connect the adb debugger (by wifi) Maybe because I get the description of the usb device with the application “usb device data”.
I try to make several scan now it’s always a success.
Thanks for your quick reply.
Regards Olivier
Olivier Huet Software Expert
SmarDTV ZI Athelia 4 147 avenue du jujubier 13704 LA CIOTAT Cedex France
Phone :+33 442 838 770
[email protected]mailto:[email protected]
Mob: fax:
+33 6 52 44 88 43 +33 442 838 101
From: Martin Marinov [mailto:[email protected]] Sent: mardi 17 octobre 2017 17:36 To: martinmarinov/AndroidDvbDriver [email protected] Cc: Huet Olivier [email protected]; Author [email protected] Subject: Re: [martinmarinov/AndroidDvbDriver] Fail to get channel (#7)
Hello Olivier,
Thanks for reporting this. This is indeed worrying.
To debug I would recommend figuring out the frequency of one of the local DVB muxes that you can receive fine with PadTV.
What you can try:
- Manual tuning in Aerial TV on that frequency.
- Using the advanced interface of the driver to confirm if any signal is detected on these frequencies. Also would be good to see things like mux speed and lost frames per second, all of which should be visible on the driver screen.
Regards, Martin
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/martinmarinov/AndroidDvbDriver/issues/7#issuecomment-337268258, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMZO-WOzPimozB8KVON4Q4DJqL5iak9qks5stMlNgaJpZM4P8UfD.
Hey Oliver,
It is possible that if you used PadTV and didn't unplugged the device before launching Aerial TV that some weird interaction has occurred between the drivers. Whatever PadTV is using is different from the Linux driver that this project is based on so there certainly can be discrepancies.
