meta-iot2050
meta-iot2050 copied to clipboard
siemens
SIMATIC IOT2050 Isar/Debian Board Support Package
Hello Team, We have set up a new Linux machine with below configuration on which we are running meta-iot2050 pipelines. The image generation process is failing with errors and below...
Hi, In the IOT2050 advanced com port configuration, we need to configure setup time and hold time for RS485 mode. Do we have any instruction or document to explain how...
Hello, we are using the IOT2050 Advanced and encounterd the same problem of issue #54. I want to bring up the problem again, cause this issue persists for us even...
Is the driver installed in the example image creation? Is there any manual? I found this but it is related to Iot2040 https://support.industry.siemens.com/forum/ww/en/posts/profinet-node-red-interface/266739/?page=0&pageSize=10
Main change point: 1. When using Win32 Disk Imager to make the boot-able SD card or USB stick that bigger than the eMMC size (16GB), the `Backup LBA` of the...
Bump and update patchsets with updated gpio-din node. Signed-off-by: Ivan Mikhaylov
The hardware watchdog configured in IOT2050 for the kernel 5.10.100 has issues, the watchdog does not reboot whereas, the watchdog configured in IOT2050 for the kernel 4.19.94 works fine with...
Currently,there is no ntp service by default,so can not sync time automatic. Using systemd-timesyncd daemon to do the time sync. Signed-off-by: chao zeng
This patch provides rpmb support for IOT2050 on am65 which includes: * TISCI protocol support * DKEK retrieval * DDR setup for DYNSHM * compile option changes for optee Signed-off-by:...
Send explicitly status of pin when initialmsg checkbutton is on. Eventhandler call will not send any DIN's status, it will send only on edge trigger which doesn't happen on start....