flora

flora copied to clipboard

No Sleep / Restart. Need Live Data

3

Hello is that possible to disable the restart of Wifi / MQT,??? I need the Live Data from the Flower Sensor, because i shower my Flowers with a Pump. If...

canim60

Cannot handle more than 7 devices

1

Everything works great except number of devices to proceed. I have 9 mi flora sensors, first 7 are handled ok and then no data is received from any left (and...

iks73

I change the order to disconnection to avoid error from mqtt client

matteo1010

Moisture spikes with ESP32

1

Hi! I have uploaded the sketch on an esp32 board (wroom32), but i have strange spikes only for moisture. It often drop 7-8% down. Miflora Firmware 3.1.9  Previously...

axl984

Fix for issue #13 Failed to find data service

1

I had the same issue as described in #13 and after applying the solution mentioned in comments the problem was resolved. So I have prepared necessary code changes to fix...

jvyoralek

If one of my sensors is not responding the complete process gets stuck, seems BLE Client has no valid working timeout for a connection, did anyone else faced this issue...

b3ster

i recognizes some other topic. if a sensor is not reachable by 2 attempts the program goes to hibernate. Even if there are other sensors in the list to be...

MonsterD1

Better label multiple devices

1

Hello, super sketch! I have already solved the problem with the wrong values. Since I read 12 sensors, a better naming in Mqtt would be an advantage. I did that...

cateyes1963

Strange value

5

Hi, I have uploaded the sketch on an esp32 board (wroom32), but i have strange value from my 3 miflora. Where Is the problem? The configuration Is stock, I have...

Sildenafil99

Failed to find data service

20

Hi, I have been testing both the sidddy / Flora and Lociii / Flora but I runt into issues. With the Lociii fork I get this after it connects to...

wackerr