Can not save setting.

[lifegpc]

Can not save setting.

[shonumi]

That's not enough information for me to help you or even determine if this is valid issue. I cannot reproduce it; saving settings works fine on 1.3 and the latest revisions as far as I can tell.

The most common cause on Windows for settings to not be saved is when GBE+ can't find its gbe.ini file. Make sure that's in the same folder as the executable. Make sure you have write access to that folder as well. If need be copy+paste the latest gbe.ini file to make sure everything is not corrupted.

But, without any details, there's nothing I can do.

[lifegpc]

I mean I want to save the keyboard settings. I need to reset it each time.

[shonumi]

You still haven't provided any information about how you setup GBE+, specifically the gbe.ini file. Make sure that file is next to the executable. That file saves all the configuration data (including keyboard controls). If GBE+ cannot read this file, it loads default values, which would explain why you cannot save anything. If GBE+ cannot write to this file (e.g. if the file is Read-Only, or you're trying to run it from a ZIP file without extracting it first) your settings won't get saved either.

At any rate, I haven't been able to reproduce any issues saving keyboard settings in GBE+. I've been testing two other machines (Windows and Linux) and recently a third one.

[quroe]

Steps to reproduce the behavior

1. unzip "gbe_plus_1.3.7z" to any directory.
2. create "gbe.ini" file in executable directory.
3. drag & drop gba file to "gbe_plus_qt.exe".
4. launch GBE+.

Detail

console shows logs. GBE+ 1.3 [Qt] GBE::Error - Could not open gbe.ini configuration file. Check file path or permissions. GBE::Error - Could not open font file ./data/fonts/block_font.bin. Check file path or permissions. I also tried latest gbe.ini file,but nothing changed. gbe.ini is "not" Read-Only.

This doesn't occur a. launch GBE+ => "File>Open..." => selet file. b. dragged & dropped gba file exists in executable directory.

Enviroment

Windows 8.1 x64 GBE+ 1.3 Program path:"C:\Apps\Emulator\gbe-plus" Configuration file path:"C:\Apps\Emulator\gbe-plus\gbe.ini" Font file path(nothing changed):"C:\Apps\Emulator\gbe-plus\data\fonts\block_font.bin"

[steventylerseanherr]

not sure about that guy but im gonna hijack his issue report with the same/similar problem ive got the gui running as admin and ive made sure the entire directory is not read only also i did ctrl+c/ctrl+v that gbe.ini file you linked earlier

other settings will save just fine but gbe wont save my controller settings after closing the settings menu my controller will work just fine but after closing gbe and reopening it the controller settings has reverted to default and keyboard if you need anymore info just ask cause im not quite sure what else you need