circuitjs1
circuitjs1 copied to clipboard
Electronic Circuit Simulator in the Browser
Please allow for an easy way to rotate and flip a selection of components. (see kicad for an example) Recreating a full (sub)circuit just because the orientation should change is...
It seems that the Sequence Generator once had a reset input (discussion from PR [here](https://github.com/pfalstad/circuitjs1/pull/14)). Without a reset input, they're very hard to use. Could a reset input be added?...
My previous request The circuit simulator is an amazing program. I love it many features. Thanks to the contributors. I am exporting Voltage data through Data Export in Output options....
There seems to be limitations with using the "analog switch" in a subcircuit. I had found that all switches "normally open" turn closed and can not be actuated by logic...
It would be great to be have the small scale components also available for the subcircuits.
FFT want to show vertical Measurement units in db .
The issue might be a bit special: I wanted to put some circuits in a collapsable DIV. When is use the corresponding plugin in my wiki, the collapsed circuit is...
any chance of a 2 terminal veritable voltage source as oppose to a veritable voltage source that is fixed to ground
the wire is quite a basic component yet i regularly find its limited functionality irritating. it would be nice to be able to set the precision of its output better...