List of DIN Fasteners

[tobiasfalk]

Still need sorting but here is a list of DIN standards and there coresponding ISO standard with chages. The list is base on Fuller

0-99

• [ ] DIN 1 Unhardened taper pins ; ISO 2339, Nominal length redefined (with round end)
• [ ] DIN 7 Parallel pins of unhardened steel and austenitic stainless steel ; ISO 2338, Nominal length redefined (with round end) form A+C deleted
• [x] DIN 84 Slotted cheese head screws – Product grade A ; ISO 1207, Modifications of dimensions < 2,5; dimension of slots changed; partly nominal lengths deleted; strength 8.8 deleted
• [ ] DIN 85 Slotted pan head screws – Product grade A ; ISO 1580, Thread included; dimensions of head and slot changed; strength 8.8 deleted
• [ ] DIN 93 Tab Washers with Long Tab
• [ ] DIN 94 Slotted set screws with long dog point ; ISO 1234, No modifications of dimensions
• [ ] DIN 95 Slotted raised countersunk (oval) head wood screws
• [X] DIN 96 Slotted round head wood screws
• [ ] DIN 97 Slotted countersunk (flat) head wood screws
• [ ] DIN 98 Rotatable ball handles
• [ ] DIN 99 Tapered handles

100-199

• [ ] DIN 125-1 Product grade A washers with a hardness up to 250 HV, designed for use with hexagon head bolts and nuts ; ISO 7089, ISO 7090, Without chamfer, up to nominal diameter 64
• [ ] DIN 125-2 Product grade A washers with a hardness from 300 HV, designed for use with hexagon head bolts and nuts ; ISO 7089, ISO 7090, Without chamfer, up to nominal diameter 64
• [ ] DIN 126 Product grade C washers, designed for use with hexagon head bolts and nuts ; ISO 7091, Nominal sizes changed
• [ ] DIN 127 Spring lock washers with square ends or tang ends
• [ ] DIN 128 Curved spring lock washers
• [ ] DIN 137 Wave spring washers
• [ ] DIN 186 T-head bolts with square nec
• [ ] DIN 188 T-head bolts with double nib

200-299

• [ ] DIN 258 Taper pins with thread ends and constant taper lengths
• [ ] DIN 264 T-head bolts

300-399

• [X] DIN 315 Fasteners - Wing nuts - Rounded wings
• [ ] DIN 316 Fasteners - Wing screws - Rounded wings
• [ ] DIN 319 Ball knobs

400-499

• [ ] DIN 404 Slotted capstan screws
• [ ] DIN 417 Slotted set screws with long dog point ; ISO 7435, No modifications of dimensions
• [ ] DIN 427 Slotted headless screws with shank ; ISO 2342
• [ ] DIN 431 Pipe nuts with thread according to DIN EN ISO 228-1
• [ ] DIN 432 Scheiben mit Außennase (Sicherungsbleche mit Nase)
• [ ] DIN 433-1 Product grade A washers with a hardness up to 250 HV, designed for use with cheese head screws ; ISO 7092, Pyramid diamond hardness 140 HV cancelled; rating changed
• [ ] DIN 433-2 Product grade A washers with a hardness up to 300 HV, designed for use with cheese head screws ; ISO 7092, Nominal sizes changed
• [ ] DIN 434 Square taper washers for U-sections
• [ ] DIN 435 Square taper washers for I-sections
• [ ] DIN 436 Square washers, especially for wood constructions
• [ ] DIN 438 Slotted set screws with cup point (modified version of ISO 7436, 1983 edition) ; ISO 7436 check for changes needs to be done
• [ ] DIN 439-1 Hexagon thin nuts with M 1,6 to M 10 threads ; ISO 4036, Correlation of dimensions with DIN 439-1, except for the width across flat of the nut M10
• [ ] DIN 439-2 Hexagon thin nuts with M 1,6 to M 52 and M 8×1 to M 52×3 threads ; ISO 4035, ISO 8675, In tables 1 and 2 abbreviations changed and some specifications (thread dimensions) changed, Standard divided by regular type screw threads and fine threads; width across flats according to ISO 272 changed; nominal size range changed; fine thread see ISO 8675; regular type screw thread see ISO 4035
• [ ] DIN 440 Plain washers – Extra large series, product grade C ; ISO 7094, Nominal sizes changed, nominal size 24 size “a” redefined to the maximum, square-end hole Form R omitted; (standard DIN 440 still valid)
• [ ] DIN 443 Sealing push-in caps
• [ ] DIN 444 Fasteners - Eye bolts
• [ ] DIN 462 Machine tools - Internal tab washers for slotted round nuts in conformity with DIN 1804
• [ ] DIN 463 Washers with 2 taps
• [X] DIN 464 Knurled thumb screws, high type; #353
• [X] DIN 465 Slotted Knurled Thumb Screws; #353
• [ ] DIN 466 Knurled nuts, high type
• [ ] DIN 467 Knurled nuts, low type
• [ ] DIN 470 Sealing washers
• [X] DIN 471 Retaining rings for shafts - Normal type and heavy type
• [X] DIN 472 Retaining rings for bores - Normal type and heavy type
• [X] DIN 478 Square head bolts with collar
• [ ] DIN 479 Square head bolts with short dog point
• [ ] DIN 480 Square head bolts with collar and short dog point with rounded end

500-599

• [X] DIN 508-1 Roofing and cladding products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel ; ISO 299, check for changes need to be done
• [X] DIN 508-2 Roofing and cladding products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium ; ISO 299, check for changes need to be done
• [X] DIN 508-3 Roofing and cladding products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel ; ISO 299, check for changes need to be done
• [ ] DIN 525 Studs for welding
• [ ] DIN 529 Masonry and foundation bolts
• [ ] DIN 546 Slotted round nuts
• [ ] DIN 551 Slotted set screws with flat point ; ISO 4766, No modifications of dimensions
• [ ] DIN 553 Slotted set screws with cone point ; ISO 7434, No modifications of dimensions
• [ ] DIN 555 Hexagon nuts; Metric Thread, Type g ; ISO 4034, Width across flats according to DIN ISO 272 included; nominal diameter reduced
• [ ] DIN 557 Square nuts; product grade C
• [ ] DIN 558 Hexagon screws, Thread Approximately to Head, Metric Thread, Type g ; ISO 4018, Nominal size extended; width across flats according to DIN ISO 272 included
• [ ] DIN 561 Hexagon head set screws with small hexagon and full dog point
• [ ] DIN 562 Square thin nuts - Product grade B
• [ ] DIN 564 Hexagon head set screws with small hexagon and half dog point and flat cone point
• [X] DIN 571 Hexagon head wood screws
• [ ] DIN 580 Lifting eye bolts
• [ ] DIN 582 Lifting eye nuts

600-699

• [ ] DIN 601 Hexagon Bolts without Hexagon Nut – with Hexagon Nut, Type g ; ISO 4016, Nominal size extended; width across flats according to DIN ISO 272 included
• [X] DIN 603 Mushroom head square neck bolts ; ISO 8677
• [ ] DIN 604 Flat countersunk head nib bolts
• [ ] DIN 605 Flat countersunk head square neck bolts with long square
• [ ] DIN 607 Cup head nib bolts
• [ ] DIN 608 Flat countersunk head square neck bolts with short square
• [ ] DIN 609 Hexagon fits bolts with long thread
• [ ] DIN 610 Hexagon fitting bolts with short threaded portion
• [ ] DIN 650 Machine tools; T-slots; dimensions
• [X] DIN 653 Knurled thumb screws, low type ; #353
• [ ] DIN 660 Round head rivets - Nominal diameters 1 mm to 8 mm ; ISO 1051 ceck for changes need to be done
• [ ] DIN 661 Countersunk head rivets - Nominal diameters 1 mm to 8 mm ; ISO 1051 check for changes need to be done
• [ ] DIN 662 Mushroom head rivets - Nominal diameters 1,6 mm to 6 mm ; ISO 1051 check for changes need to be done
• [ ] DIN 674 Flat round head rivets - Nominal diameters 1,4 mm to 6 mm ; ISO 1051 check for changes need to be done

700-799

• [ ] DIN 703 Shaft Collars with Set Screws
• [ ] DIN 705 Adjusting rings
• [ ] DIN 741 Clips for free ends of wire ropes; to meet requirements of minor importance
• [ ] DIN 766 Round steel link chains - Round steel link chains, pitch 2,8d, for chain conveyors, grade 3, quenched and tempered ; don't know if implemanting a chain makes sense
• [ ] DIN 787 Bolts and screws for T-slots ISO 299 checks for changes need to be done

800-899

• [ ] DIN 835 Studs - Metal end ≈ 2 d

900-999

• [ ] DIN 906 Internal drive pipe plugs - Conical thread
• [ ] DIN 908 Internal drive screw plugs with collar - Cylindrical thread
• [ ] DIN 909 Hexagon head pipe plugs - Conical thread
• [ ] DIN 910 Hexagon head screw plugs with collar - Cylindrical thread
• [ ] DIN 911 Hexagon socket screw keys (allen keys) **
• [x] DIN 912 Hexagon socket head cap screws ; ISO 4762, Nominal size range changed; fine thread deleted (ISO 21269)
• [ ] DIN 913 Hexagon socket set screws with flat point ; ISO 4026, Nominal sizes M1.4, M1.8, M14, M18 and M22 omitted
• [ ] DIN 914 Hexagon socket set screws with cone point ; ISO 4027, Nominal sizes M1.4, M1.8, M14, M18 and M22 omitted
• [ ] DIN 915 Hexagon socket set screws with dog point ; ISO 4028, Nominal sizes M1.4, M1.8, M14, M18 and M22 omitted
• [ ] DIN 916 Hexagon socket set screws with cup point ; ISO 4029
• [X] DIN 917 Hexagon cap nuts, low type
• [ ] DIN 920 Slotted pan head screws with small head
• [ ] DIN 921 Slotted pan head screws with large head
• [ ] DIN 923 Slotted pan head screws with shoulder
• [ ] DIN 927 Slotted shoulder screws
• [X] DIN 928 Square weld nuts
• [X] DIN 929 Hexagon weld nuts
• [ ] DIN 931-1 Hexagon head bolts with shank; M 1,6 to M 39 screw threads, Product grades A and B ; ISO 4014, Nominal size extended; width across flats according to DIN ISO 272 included
• [X] DIN 933 Hexagon head screws – Product grades A and B ; ISO 4017, Nominal size extended; width across flats according to DIN ISO 272 included
• [X] DIN 934 Hexagon nuts; Metric screw threads; Product grades A and B ; ISO 4032, ISO 8673, Nominal diameter changed, height of the nut changed partially; nuts with fine thread specified in DIN EN ISO 8673; nuts with regular type screw thread specified in DIN EN ISO 4032; width across flats according to DIN ISO 272 included
• [ ] DIN 935-1 Hexagon slotted and castle nuts - Part 1: Metric coarse and fine pitch thread, product grades A and B ; only coarse pitch is implemented, the fine pitch is missing
• [ ] DIN 935-3 Hexagon slotted nuts - Part 3: Metric coarse pitch thread, product grade C
• [ ] DIN 936 M 8 to M 52 and M 8 × 1 to M 52 × 3 hexagon thin nuts; product grades A and B ; ISO 4035, ISO 8675 check for changes need to be done
• [ ] DIN 937 Hexagon thin castle nuts (previous design)
• [ ] DIN 938 Studs - Metal end ≈ 1 d
• [ ] DIN 939 Studs - Metal end ≈ 1,25 d
• [ ] DIN 960 Hexagon bolts, Metric fine thread, Types m and mg ; ISO 8765, Nominal size extended; width across flats according to DIN ISO 272 included
• [X] DIN 961 M 8×1 to M 100×4 hexagon head bolts with fine pitch thread ; ISO 8676, Nominal size extended; width across flats according to DIN ISO 272 included
• [ ] DIN 963 Slotted countersunk (flat) head screws (Countersunk heads according to ISO) ; ISO 2009, Nominal size changed; head dimension changed; thread length changed; strength 8.8 cancelled
• [ ] DIN 964 Slotted raised countersunk (oval) head screws (Countersunk heads according to ISO) ; ISO 2010, Nominal size changed; head dimension changed; thread length changed; strength 8.8 cancelled
• [ ] DIN 965 Cross recessed countersunk (flat) head screws (Countersunk heads according to ISO) ; ISO 7046-1, Nominal size changed; head dimension changed; thread length changed; strength 8.8 included (see Part 2); penetration depth of cross slots changed
• [ ] DIN 966 Cross recessed countersunk (oval) head screws (Countersunk heads according to ISO) ; ISO 7047, Nominal size changed; head dimension changed; thread length changed; strength 8.8 omitted; penetration depth of cross slots changed
• [X] DIN 967 Cross recessed pan head screws with collar - Product grade A
• [ ] DIN 975 Threaded rods (not intended for new designs)
• [ ] DIN 976 Fasteners - Stud bolts - Part 1: Metric thread
• [ ] DIN 979 Hexagon thin slotted and castle nuts - Metric coarse and fine pitch thread, product grades A and B ; ISO 7038 checks for changes need to be done
• [ ] DIN 980 All-metal prevailing torque type hexagon nuts ; ISO 7042, Height of nut changed; width across flat according to ISO 272 included; and ISO 10513, Height of nut changed; width across flat according to ISO 272 included
• [ ] DIN 981 Rolling bearings - Locknuts
• [ ] DIN 982 Prevailing torque type hexagon nuts with non-metallic insert ; ISO 7040, ISO 10512, Height of nut changed; width across flat according to ISO 272 included
• [ ] DIN 983 Retaining rings with lugs for shafts (internal circlips)
• [ ] DIN 985 Prevailing torque type hexagon thin nuts with non-metallic insert ; ISO 10511, Height of nut changed; width across flat according to ISO 272 included
• [ ] DIN 986 Prevailing torque type hexagon domed cap nuts with nonmetallic insert
• [ ] DIN 988 Shim rings and supporting rings

1000-1099

• [ ] DIN 1052

1100-1199

• [X] DIN 1143-1 Nails for use in automatic nailing machines; #353
• [X] DIN 1144 Nails for light weight building slabs; #353
• [X] DIN 1151 Round plain head nails ; replayced by DIN EN 10230-1 Steel wire nails - Part 1: Loose nails for general applications (ex DIN 1151, there may be changes) ; #353
• [X] DIN 1152 Round nails with cold headed head ; #353
• [ ] DIN 1158 Hook nails
• [x] DIN 1160 Wire nails with extra large head
• [ ] DIN 1163 Molding pins

1200-1299

1300-1399

1400-1499

• [ ] DIN 1433 Clevis pins without head ; ISO 2340, Some other nominal lengths defined
• [ ] DIN 1434 Clevis pins with head ; ISO 2341, Only one head dimension. Some other nominal lengths defined
• [ ] DIN 1435 Clevis pins with head ; ISO 2341, Only one head dimension. Some other nominal lengths defined
• [ ] DIN 1436 Clevis pins with head ; ISO 2341, Only one head dimension. Some other nominal lengths defined
• [ ] DIN 1440 Plain washers for clevis pins; product grade A ; ISO 8738, Nominal sizes changed
• [ ] DIN 1441 Washers for clevis pins - Product grade C
• [ ] DIN 1443 Clevis pins without head ; ISO 2340
• [ ] DIN 1444 Clevis pins with head ; ISO 2341, Some other nominal lengths defined
• [ ] DIN 1470 Grooved pins – Fulllength parallel grooved, with pilot ; ISO 8739, Nominal lengths redefined. Shear rate increased.
• [ ] DIN 1471 Grooved pins – Fulllength taper grooved ; ISO 8744, Nominal lengths redefined. Shear rate increased.
• [ ] DIN 1472 Grooved pins – Half-length taper grooved ; ISO 8745, Nominal lengths redefined. Shear rate increased.
• [ ] DIN 1473 Grooved pins – Full-length parallel grooved, with chamfer ; ISO 8740, Nominal lengths redefined. Shear rate increased.
• [ ] DIN 1474 Grooved pins – Half-length reverse-taper grooved ; ISO 8741, Nominal lengths redefined. Shear rate increased.
• [ ] DIN 1475 Grooved pins – One-third-length centre grooved ; ISO 8742, Nominal lengths redefined. Shear rate increased.
• [ ] DIN 1476 Grooved pins with round head ; ISO 8746, Chamfer redefined
• [ ] DIN 1477 Grooved pins with countersunk head ; ISO 8747, Chamfer redefined
• [ ] DIN 1478 Turnbuckles made from steel tubes or round steel bars
• [ ] DIN 1479 Hexagon turnbuckles
• [ ] DIN 1480 Forged turnbuckles, (open type)
• [ ] DIN 1481 Spring-type straight pins – Slotted, heavy duty ; ISO 8752, Specification “non-jamming” included; chamfer redefined; partial change of dimensions

1500-1599

• [X] DIN 1587 Hexagon cap nuts, high type

1600-1699

1700-1799

1800-1899

• [ ] DIN 1804 Slotted Round Nut for Hook Spanner; ISO Metric Fine Thread
• [ ] DIN 1816 Round Nut with Set Pin Holes Inside; ISO Metric Fine Thread

1900-1999

2000-2099

• [ ] DIN 2093 Disc springs - Quality specifications - Dimensions

2100-2199

2200-2299

2300-2399

2400-2499

2500-2599

• [ ] DIN 2510-1 Bolted connections with reduced shank, survey and installation; studies relating to the calculation of bolted connections
• [ ] DIN 2510-2 Bolted connections with waisted shank - Part 2: Metric thread with large clearance - Nominal dimensions and limits of size
• [ ] DIN 2510-3 Bolted Connections with Reduced Shank; Stud-bolts
• [ ] DIN 2510-4 Bolted Connections with Reduced Shank; Studs
• [ ] DIN 2510-5 Bolted Connections with Reduced Shank; Hexagon Nuts
• [ ] DIN 2510-6 Bolted connections with waisted shank - Part 6: Cap nuts
• [ ] DIN 2510-7 Bolted Connections with Reduced Shank - Extension Sleeves
• [ ] DIN 2510-8 Bolted Connections with Reduced Shank; Threaded Holes for Studs

2600-2699

2700-2799

2800-2899

2900-2999

3000-3099

• [ ] DIN 3016-1 Fastening clamps - Part 1: With tongue
• [ ] DIN 3016-2 Fastening clamps - Part 2: With fastening lugs
• [ ] DIN 3017-1 Hose clamps - Part 1: Clamps with worm gear drive, shapes A and B
• [ ] DIN 3017-2 Hose clamps - Part 2: Clamps with fastening lugs, shapes B1 and B2
• [ ] DIN 3017-3 Hose clamps - Part 3: Bolt clamps, shapes C1 and C2
• [ ] DIN 3017-5 Hose clamps - Part 5: Wide strip hose clamps with fastening lugs, shapes D and E

3100-3199

3200-3299

3300-3399

3400-3499

• [ ] DIN 3404 Lubricating nipples; button head
• [ ] DIN 3405 Lubricating nipples cupped type

3500-3599

• [ ] DIN 3567 Pipe Brackets for NW 20 to 500
• [ ] DIN 3568 Clamping plates for the suspension of pipes on I and IPB beams
• [ ] DIN 3570 Steel Strap for Tubes of NW 20 to 500

4000-4099

4100-4199

5200-5299

• [ ] DIN 5299 Snap hook half-round wire, round wire and forged

5400-5499

• [ ] DIN 5406 Rolling bearings - Lockwashers; Safety plate, Lockclip

5500-5599

• [ ] Compressed air equipment for rail vehicles - Locking screws with collar and vent

6300-6399

• [ ] DIN 6303 Knurled nuts
• [ ] DIN 6304 Tommy screws with fixed clamping bolt
• [ ] DIN 6305 Tommy nuts with fixed clamping bolt
• [ ] DIN 6306 Tommy screws with movable clamping bolt
• [ ] DIN 6307 Clamping Nuts with Loose Bar
• [ ] DIN 6311 Thrust pads
• [X] DIN 6319 Spherical washers, conical seats
• [ ] DIN 6321 Support and location pins
• [ ] DIN 6323 Slot stones, loose
• [ ] DIN 6325 Parallel pins, Hardened; Tolerance Zone m6 ; ISO 8734, Some other nominal lengths defined
• [X] DIN 6330 Hexagon nuts with a height of 1,5 d
• [X] DIN 6331 Hexagon collar nuts with a height of 1,5 d
• [ ] DIN 6332 Grub screws with thrust point
• [ ] DIN 6335 Palm grips
• [ ] DIN 6336 Star grips
• [X] DIN 6340 Washers for clamping devices

6700-6799

• [ ] DIN 6796 Conical spring washers for bolted connections ; ISO 106797 check for changes needs to be done
• [ ] DIN 6797 Toothed lock washers
• [ ] DIN 6798 Serrated lock washers
• [X] DIN 6799 Retaining washers for shafts

6800-6899

• [ ] DIN 6885-1 Drive type fastenings without taper action, parallel keys, keyways - Deep pattern - Part 1: Dimensions, tolerances, mass ; ISO 773 check for changes needs to be done
• [ ] DIN 6885-2 Drive type fastenings without taper action, parallel keys, keyways - Deep pattern for machine tools - Part 2: Dimensions, tolerances, mass ; ISO 773 check for changes needs to be done
• [ ] DIN 6885-3 Drive type fastenings without taper action, parallel keys, keyways - Low pattern - Part 3: Dimensions, tolerances, mass ; ISO 773 check for changes needs to be done
• [ ] DIN 6886 Stressed-type Fastenings with Taper Action; Taper Keys, Keyways, Dimensions and Application
• [ ] DIN 6887 Stressed-type Fastenings with Taper Action; Taper Keys with Gip Head, Keyways, Dimensions and Application : ISO 7744 check for changes needs to be done
• [ ] DIN 6888 Drive type fastenings without taper action - Woodruff keys - Dimensions and application ; ISO 3912 check for changes needs to be done
• [ ] DIN 6899 Steel thimbles for fibre ropes

6900-6999

• [ ] DIN 6911 Hexagon socket screw keys with pilot
• [X] DIN 6912 Hexagon socket head cap screws with reduced loadability - Low head, with centre
• [ ] DIN 6914 High-strength hexagon head bolts with large widths across flats for structural steel bolting ; ISO 7412
• [ ] DIN 6915 High-strength hexagon nuts with large widths across flats for structural steel bolting ; ISO
• [ ] DIN 6916 Washers for high tensile bolting in steel structures ; ISO 7416
• [ ] DIN 6917 Square taper washers for high-strength structural bolting of steel I sections
• [ ] DIN 6918 Square taper washers for high-strength structual bolting of steel channel sections
• [ ] DIN 6921 Hexagon flange bolts ; ISO 8102, Dimensions partially changed; width across flats according to ISO 272; strength 12.9 omitted
• [ ] DIN 6923 Hexagon nuts with flange ; ISO 4161, Fine thread omitted to be included in a separate standard later; width across flat M10 changed
• [ ] DIN 6924 Prevailing torque type hexagon nuts with non-metallic insert ; ISO 7040, ISO 10512, Height of nut changed; width across flat according to ISO 272 included
• [ ] DIN 6925 Prevailing torque type all-metal hexagon nuts ; ISO 7042, ISO 10513, Height of nut changed; width across flat according to ISO 272 included
• [ ] DIN 6926 Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread ; ISO 12125, Width across flat M10 changed
• [ ] DIN 6927 Prevailing torque type – All-metal hexagon nuts with flange ; ISO 7044, Width across flat M10 changed

7300-7399

• [ ] DIN 7337 Break mandrel blind rivets
• [ ] DIN 7343 Spring-type straight pins – Coiled, standard duty ; ISO 8750, Range of nominal diameters and lengths extended. Shear range changed.
• [ ] DIN 7344 Spring-type straight pins – Coiled, heavy duty ; ISO 8748, Range of nominal diameters and lengths extended. Shear range changed.
• [ ] DIN 7346 Spring-type straight pins, slotted, light duty ; ISO 3337, Specification “non-jamming” included; chamfer redefined; partial change of dimensions
• [ ] DIN 7349 Plain washers for bolts with heavy clamping sleeves

7500-7599

• [ ] DIN 7500-1 Thread rolling screws for ISO metric thread – Part 1: Technical specifications for case hardened and tempered screws ; ISO, Normative revision, values for case-hardening depth and hole size revised, torque values reduced
• [ ] DIN 7504 Cross recessed countersunk head drilling screws with tapping screw thread ; ISO 15480, ISO 15481, ISO 15482, ISO 15483 and ISO 10666, thread ST 3.9 omitted; hexagon head with collar and slot (Form L) omitted
• [ ] DIN 7513 Thread cutting screws - Hexagon screws and slotted head screws - Dimensions, requirements, testing
• [ ] DIN 7516 Thread cutting screws - Cross recessed head screws - Dimensions, requirements, testing

7600-7699

• [ ] DIN 7603 Sealing rings
• [ ] DIN 7604 Hexagon head screw plugs - Light type - Cylindrical thread
• [ ] DIN 7643 Compression couplings - Hollow screws for ring-type banjos

7900-7999

• [ ] DIN 7964 Reduced shank bolts and screws with coarse thread
• [ ] DIN 7965 Screwed Inserts (Screw Plugs)
• [X] DIN 7967 Self Locking Counter Nuts
• [ ] DIN 7968 Hexagon fit bolts with hexagon nut for steel structures
• [ ] DIN 7969 Slotted countersunk head bolts with hexagon nut for steel structures
• [ ] DIN 7971 Slotted pan head tapping screws ; ISO 1481 check for changes need to be done
• [ ] DIN 7972 Slotted countersunk head tapping screws ; ISO 1482 check for changes need to be done
• [ ] DIN 7973 Slotted raised countersunk head tapping screws ; ISO 1479 check for changes need to be done
• [ ] DIN 7976 Slotted set screws with cup point ; ISO 1479, No modifications of dimensions
• [ ] DIN 7977 Unhardened taper pins with external thread ; ISO 8737, Technical delivery conditions partially changed
• [ ] DIN 7978 Unhardened taper pins with internal thread ; ISO 8736, Dimensions partially changed
• [ ] DIN 7979 Parallel pins with internal thread, of unhardened and austenitic stainless steel ; ISO 8733, ISO 8735, Dimensions partially changed
• [ ] DIN 7980 Spring lock washers with spuare ends for cheese head screws
• [ ] DIN 7981 Cross recessed pan head tapping screws ; ISO 7049, Marginal change of head dimensions. Caution with automatic feed and connection systems
• [ ] DIN 7982 Countersunk (flat) head tapping screws with cross recess ; ISO 7050, Head dimensions and countersunk angles changed
• [ ] DIN 7983 Raised countersunk (oval) head; tapping screws with cross recess ; ISO 7051, Head dimensions and countersunk angles changed
• [X] DIN 7984 Hexagon socket head cap screws with low head with reduced loadability
• [ ] DIN 7985 Recessed raised cheese (fillister) head screws ; ISO 7045, Nominal size changed; head dimension changed; thread length changed; penetration depth of cross slots changed
• [ ] DIN 7989-1 Washers for steel structures - Part 1: Product grade C
• [ ] DIN 7989-2 Washers for steel structures - Part 2: Product grade A
• [ ] DIN 7990 Hexagon head bolts with hexagon nut for steel structures
• [ ] DIN 7991 Hexagon socket countersunk head screws ; ISO 10462
• [ ] DIN 7993 Round Wire Snap Rings and Snap Ring Grooves for Shafts and Bores
• [ ] DIN 7995 Cross recessed raised countersunk head wood screws
• [X] DIN 7996 Cross recessed round head wood screws
• [ ] DIN 7997 Cross recessed countersunk head wood screws
• [ ] DIN 7999 High strength hexagon fit bolts with large widths across flats for structural steel bolting ; EN 14399-8 check for changes need to be done

8100-8199

9000-9099

• [ ] DIN 9021 Washers; outside diameter ˜ 3 x bolt diameter ; ISO 7093-1, ISO 7093-2, Dimensions partially changed

11000-11099

• [ ] DIN 11023 Agricultural machinery; linch pins
• [ ] DIN 11024 Spring Cotters

15000-15099

• [ ] DIN 15058 Lifting appliances; axle holder

15200-15299

• [ ] DIN 15237 Continuous mechanical handling equipment; seating screws and cupped washers for the attachment of components to belts

22400-22499

25100-25199

• [ ] Railway vehicles - Mushroom head anchor screws with metric ISO thread - Class C

DIN 25200-25299

28100-28199

• [ ] DIN 28129 Clamp nuts for covers

32500-32599

• [ ] DIN 32501-1 Studs for stud welding with tip ignition; threaded studs ; ISO 13918 check for changes need to be done
• [ ] DIN 32501-2 Studs for stud welding with tip ignition; unthreaded studs ; ISO 13918 check for changes need to be done
• [ ] DIN 32501-3 Studs for stud welding with tip ignition; threaded studs for automatic feed ; ISO 13918 check for changes need to be done
• [ ] DIN 32501-5 Studs for stud welding with tip ignition; studs with internal thread for automatic feed ; ISO 13918 check for changes need to be done

34800-34899

• [ ] DIN 34816 Plastic plain washers - Large series
• [ ] DIN 34821 Cheese head screws with 12 point socket

68100-68199

• [ ] DIN 68163 Fasteners for assembling timber pallets; nails

70800-70899

• [ ] DIN 70852 Groove nuts; dimensions

70900-70999

• [ ] DIN 70952 Locking plates for groove nuts DIN 70852

71400-71499

• [ ] DIN 71412 Lubricating nipples; cone type

71700-71799

• [ ] DIN 71752 Fork joints; yokes

71800-71899

• [ ] DIN 71802 Ball joints with or without circlips

74300-74399

• [ ] DIN 74361-1 Disc wheels for motor vehicles and trailers - Part 1: Connection dimensions for bolt- and mixed centering
• [ ] DIN 74361-2 Disc wheels for motor vehicles and trailers - Part 2: Fastening devices for bolt centering
• [ ] DIN 74361-3 Disc wheels for motor vehicles and trailers - Part 3: Dimensions and fastening devices for hub-centering

80700-80799

• [ ] DIN 80701 Wing nuts
• [ ] DIN 80704 Bow nuts and eyebolts - Metric screw thread
• [ ] DIN 80705 Thin nuts with small widths across flats - Coarse pitch thread, fine pitch thread

82100-82199

• [ ] DIN 82101 Components for lifting, towing, lashing - Shackle, dee - Non-alloy quality steel

DIN EN

10200-10299

• [ ] DIN EN 10230-1 Steel wire nails - Part 1: Loose nails for general applications ;(ex DIN 1151, there may be changes)

[hasecilu]

Fasteners with no changes in dimensions could be implemented as alias and it's very easy to maintain and for those which have extra nominal sizes a new feature to extend another fastener type may be needed to avoid duplicating common sizes. Isn't the DIN 508 T-Slot nut working for you?

[tobiasfalk]

Fasteners with no changes in dimensions could be implemented as alias and it's very easy to maintain and for those which have extra nominal sizes a new feature to extend another fastener type may be needed to avoid duplicating common sizes.

Yes sounds good, but checking if it really is the same still needs to be done. I did not confirm everything that is written as change

[tobiasfalk]

Isn't the DIN 508 T-Slot nut working for you?

Yes I do not see it in FreeCAD it self, the same is with "DIN 1624" thats why I closed the issue direktly #320

[hasecilu]

It's on its own group "TSlot", it won't appear in the list in other nuts

[tobiasfalk]

Ok, had to remove and re-install it, and now it appears

[hasecilu]

With #353 you can mark 1143, 1144, 1151, 1152, 1160, 464, 465, 653

[ToniTen]

DIN 25201 wedge lock fasteners are not included in this list. I requested them on #400

[tobiasfalk]

@ToniTen do you mean

• [ ] DIN 25201-1 Design guide for railway vehicles and their components - Bolted joints - Part 1: Classification of bolted joints
• [ ] DIN 25201-2 Design guide for railway vehicles and their components - Bolted joints - Part 2: Design - Mechanical applications
• [ ] DIN 25201-3 Design guide for railway vehicles and their components - Bolted joints - Part 3: Design - Electrical application
• [ ] DIN 25201-4 Design guide for railway vehicles and their components - Bolted joints - Part 4: Securing of bolted joints
• [ ] DIN 25201-5 Design guide for railway vehicles and their components - Bolted joints - Part 5: Protection against corrosion
• [ ] DIN 25201-6 Design guide for railway vehicles and their components - Bolted joints - Part 6: Connecting dimensions
• [ ] DIN 25201-7 Design guide for railway vehicles and their components - Bolted joints - Part 7: Installation

I think that part 6 has the dimensions, but I am not sure size I do not have access to those

[ToniTen]

I think that part 6 has the dimensions, but I am not sure size I do not have access to those

I unfortunately don't have access to the norms. we use those, and they're listed at https://torqbolt.com/din-25201-lock-rite-washer-dimensions-standards-specifications as stated in the other request

[Rahix]

ISO 4762 / DIN 912 is already present :)

[tobiasfalk]

ISO 4762 / DIN 912 is already present :)

Yes and no, DIN 912 has M1,4, M18, M22, M27, M33, M72, M80, M90 and M100

In #286 it is checked of but in my opinion for DIN 912 the missing sizes need to be added to a DIN 912 type.