Dmitriy Shafranskiy
Dmitriy Shafranskiy
With mine ELRS Jumper NANO adapter I decided to order another one instead of trying to fix it. I have no idea what's going on there, I'll leave it for...
``` ets Jan 8 2013,rst cause:2, boot mode:(3,7) load 0x4010f000, len 3460, room 16 tail 4 chksum 0xcc load 0x3fff20b8, len 40, room 4 tail 4 chksum 0xc9 csum 0xc9...
Windows 10 / Serial programmer voltage 3.3v, 5v. Verified serial device, issue is not in programming hardware.
@dz0ny thank you for reply - I had tried re-partitioner, but it did not help. I had enabled debug logs to see where it fails specifically: ``` --------------- CUT HERE...
If that would help - I have decoded exception stacktrace into something useful: ``` 0x4020fbdc: esp_yield at ??:? 0x402104fd: __delay at ??:? 0x40202ea3: SX1280Hal::reset() at ??:? 0x402025ef: SX1280Driver::Begin() at ??:?...
My hardware matches exactly [this one](https://www.flyingtech.co.uk/electronics/jumper-aion-24ghz-mini-elrs-expresslrs-receiver). Maybe some other chip RF is used & I can try other sketch instead ?
Closing this one, don't think developers have time to help with, and $6 or $12 is not too much for a replacement (which worked)
Btw second attempt - to use another ELRS module was more successful: * flash new version - OK * solder to motherboard - OK * binding to controller - OK...
Долго размышлял над подобным сам, пока не натыкнулся на Aliexpress сегодня. При наличии прямых рук, 3D принтера - можно попробовать собрать самому. А может лучше сделать проект самим с нуля:...