ESP32 LoRa APRS Modem

This project is amateur radio ESP32 based LoRa KISS Bluetooth/BLE/USB/TCPIP modem + LoRa APRS-IS RX/TX iGate server over WiFI + LoRa APRS digipeater + Codec2 DV modem (with Codec2 Talkie Android application).

⚠ To configure sketch modify default parameters in config.h file.

• For project description, detailed setup and more information, please, visit our Wiki at https://github.com/sh123/esp32_loraprs/wiki
• For discussions, visit https://github.com/sh123/esp32_loraprs/discussions

⚠ Project also supports APRSDroid TNC2 text APRS packet mode (configurable), which makes it interoperable with other LoRa APRS trackers without AX25 support.

Supported module types: SX126X, SX127X and other modules supported by RadioLib.

Modules, which are used by users and known to work

• SX126X (suggested, 1W modules will provide decent coverage for APRS, stable frequency suitable for < 125 kHz BW at 433 MHz, 5V from USB power bank is enough to power it, has additional LNA)
  • 👍 E22-400M30S (SX1268)
  • E220-400M30S (LLCC68) BW125 SF from 7 to 9 (chip limitations)
• SX127X (low power, 50-100mW, temperature frequency drift, problematic for narrow band)
  • RA-01 (SX1278)
  • RA-02 (SX1276)
  • TTGO T-Beam (SX1276)

Dependencies

Install via libraries:

• Arduino ESP32 library: https://github.com/espressif/arduino-esp32
• LoRa library
  • RadioLib library (⚠use github master version): https://github.com/jgromes/RadioLib
  • or LoRa Arduino library: https://github.com/sandeepmistry/arduino-LoRa
• Arduino Timer library: https://github.com/contrem/arduino-timer
• CircularBuffer library: https://github.com/rlogiacco/CircularBuffer
• DebugLog library: https://github.com/hideakitai/DebugLog

Development board

Development board schematics, case and antenna models are available under cad and schematics.