AqualinkD
AqualinkD copied to clipboard
sfeakes
Daemon to control Jandy Aqualink RS pool equipment from any home automation hub (Alexa, Homekit & Siri, Home Assistant, smartthings, domoticz etc) or web browser.
Raspberry pi model 4 model B with: Raspberry Pi OS Lite Release date: April 4th 2022 System: 64-bit Kernel version: 5.15 Debian version: 11 (bullseye) Attempts to run pre-compiled binary...
AqualinkD serial_logger V1.4 Notice: RS Serial: Logging serial information! Please wait.| Notice: RS Serial: RS485 interface received 600 packets in 123 seconds (~4.88 Msg/Sec) Notice: RS Serial: Jandy Control Panel...
see ballle98/AqualinkD#58 If you compile AqualinkD on the new bullseye version of Raspberry OS you will see these compiler warnings: ``` OS: 11 (bullseye) GLIBC: ldd (Debian GLIBC 2.31-13+rpt2+rpi1+deb11u2) 2.31...
### Discussed in https://github.com/sfeakes/AqualinkD/discussions/171 Originally posted by **igorek24** April 23, 2022 My Jendy AquaPure SWG keeps turning on and off when AqualinkD service is running and the only way to...
I commented out the buttons I don't want to see (I don't have a heater or a spa) but they keep showing up on the webui. Am I doing something...
I thought Sprinklerd was good, this is next level - awesome work! Regarding the documented wiki re PDA only installs, do you recommend the M8 be purchased with an RS...
First let me say thanks again for your work in progressing AqualinkD. My Raspberry Pi was knocked out in a lightning storm and I decided to reinstall on an unused...
There is a bug in setpoint_check() that is limiting the spa heater setpoint to 103 see ballle98/AqualinkD#56 ``` 9:27:22.399 Debug: PDA: PDA Aqualink daemon in sleep mode 19:27:23.434 Debug: NetService:WS:...