Sergeant "D"
Sergeant "D"
Hi and welcome. Please change the Overshopt protection value to 32 instead of 22. EMS reports the ABSOLUTE modulation instead of the Relative modulation that OpenTherm reports.
Thanks for the feedback. Further raise the OPV to 35 now. The correct amount of cycles is 3 per hour.
We use the same approach as OpenTherm: all commands are sent every 30 seconds. That’s why you often see these messages. It would be great if you could help us...
Can you update to the latest dev version? It might help by not sending the heatingoff command so often.
It looks you made it, well done! Now we need to look at the `selburnpow` command. If the boiler continues to work when the the boiler follows the selected `selburnpow`...
Do you have any TRVs in your installation? It looks like only a few are open, which results in a higher boiler flow water temperature. Normally, when you’re in normal...
Ok, that makes sense. We have a development that can keep the boiler ON more time. You need to enable the dynamic minimum setpoint in advanced settings and then in...
Open the sidebar -> Tap your username -> Enable advanced mode
Can you please add some graphs of the eTwist behavior vs SAT climate entity?
OK, can you create an automation that synchronizes the eTwist setpoint with the SAT setpoint?