sergbrest

I connected the card according to the pinout above. On firmware ZxSpectrumPicomputerVga1111Zx.uf2 there is no access to the card. There are no pulses on the SPI bus. On firmware ZxSpectrumPicomputerVgaZx.uf2...

I tried 3 different cards. Does not work. And with the assembly of VGA 1111 the LED on the PICO board does not blink  . Here is my connection...

What am I doing wrong? The LED does not blink when accessing the SD card. ZxSpectrumPicomputerVga1111Zx.uf2 https://youtube.com/shorts/9dRyPVo6UZ0 LED blinks when accessing the SD card. ZxSpectrumPicomputerVgaZx.uf2 https://www.youtube.com/shorts/AeF-mSUYrqM

Sd card https://www.arduino-tech.com/robotdyn-micro-sd-card-high-speed-module-for-3-3v-5v-logic-for-microsd-mmc-card/ The card is powered by 3.3 volts. Constantly. memory card for 8 and 16 gigabytes. Maybe I need to find a 2 gigabyte card? Maybe the card...

disconnected, did not help

Soldered a new circuit. Unfortunately, the memory card did not work. Mounting SD card 0... Core 1 running... error: A hard error occurred in the low level disk I/O layer...