serbyxp

@FezzFest my hotspot isn't on that list. But my hotspot is having all sorts of dial errors this is just a log from the 1/12/2022.1 update *attached* I'm no programmer...

@GeoffAbbott you ever figure that error {"error_message":"failed connecting to usb", "original_error":"Could not retrieve config"}

Switched out broken SX1301 for new SX1302. I updated app.json under env service pkt-fwrdr, “VARIANT: “CONCENTRATOR_RESET_PIN=25” as it is the only different pin for US915 global.conf… It did not work....

Im not sure but I think, the GL1571-UX that came with my Nebra miner, I cant really understand the documentation part where it talks about the different versions USB /...

The reason I ask is because I see this in the Schematic, But I am not clear on the parts I put a Star Or Arrow...    ...

 I see the usb to uart chip do you mean the mPCIe pins that are usb_DM DP , don’t connect to the uart chip that connects to the esp32...

Yes, my Module ( concentrator sx1302) has STM32 on the same MPCIe pins as SIMxx. My Question was does the USB_DM USB_DP in the diagram above end at the p1...

> Hi @serbyxp! Have you been able to learn more about using the SX1302 concentrator with the T-PCIE? only thing I found was micropython sx1308 sketch that might be able...

thanks, ill take a look, just started with this orangePi have most the raspi stuff down, but the community so big and easy to find, (not so much the boards...

> If you want to build the binary yourself install Go on your Linux machine, clone the `go-ios` project, go inside the main folder and execute `go build .`. It...