nexmon

nexmon copied to clipboard

Nexmon stops working after reboot

10

I have a Raspberry Pi 3, running Raspbian Jessie, and have gotten nexmon working, however when we reboot the Pi it stops working. After rebooting running 'nexutil' gives this output:...

StephenWetzel

Getting error : /home/pi/nexmon/buildtools/gcc-arm-none-eabi-5_4-2016q2-linux-armv7l/bin/../lib/gcc/arm-none-eabi/5.4.1/cc1: error while loading shared libraries: libmpfr.so.4: cannot open shared object file: No such file or directory

1

Board : Raspberry Pi 4 Going to the folder : cd /home/pi/nexmon/patches/bcm43455c0/7_45_189/nexmon/ Problem occured when : Installing the Nexmon Patches on my Raspberry Pi, going to the folder /home/pi/nexmon/patches/bcm43455c0/7_45_189/nexmon/ and...

BidyutSaha

Error while building driver for kernel 5.4.40

5

I get the following error while running `make` in `patches/bcm43455c0/7_45_206/nexmon/` on Raspberry Pi 4 with kernel version 5.4.40 `ERROR: "brcmu_dbg_hex_dump" [/home/pi/nexmon/patches/bcm43455c0/7_45_206/nexmon/brcmfmac_5.4.y-nexmon/brcmfmac.ko] undefined! ERROR: "__brcmf_dbg" [/home/pi/nexmon/patches/bcm43455c0/7_45_206/nexmon/brcmfmac_5.4.y-nexmon/brcmfmac.ko] undefined! make[2]: *** [scripts/Makefile.modpost:94: __modpost]...

AvinashNargund

mount: '/vendor' not in /proc/mounts

1

I run into this issue while I use Pure Nexus 7.1.2 as operating system in Nexus 6. mount: '/vendor' not in /proc/mounts Makefile:162: recipe for target 'install-firmware' failed make: ***...

klion1994

Galaxy Note 3 Nexmon breaks WiFi

14

Hello. I'm using a Galaxy Note 3 (BCM4339) and I installed the Nexmon firmware via Hijacker (https://github.com/chrisk44/Hijacker), onto Lineage OS (currently using 18.1/Android 11, and this issue also exists on...

ghost

Galaxy S8

10

I was curious, over on XDA there are suposed bcm-4361 drivers for the S8 capable of monitor mode. If this is true would it be possible to incorporate these with...

ozsteyr

SELinux needs to be disabled to make nexutil work on new devices

11

Nexutil sends ioctls to the bcmdhd driver that forwards those to the Wi-Fi firmware and delivers the result back to nexutil. The same is true for libnexmon.so. On older devices,...

matthiasseemoo

Unable to change to channels on 80MHz bandwidth on Pi 4

7

I have a Pi 4 running the latest version of Raspberry Pi OS (August 2020) on which I've installed nexmon using the instructions for bcm43455c0 (7_45_206) hardware. This appears to...

Gi-z

hi;I followed steps in https://github.com/nexmonster/nexmon_csi/tree/pi-5.4.51-plus I tried to capture packets in pi4 using this lines: mcp -c 36/20 -C 1 -N 1 ifconfig wlan0 up nexutil -Iwlan0 -s500 -b -l34...

dejavo4e

Hi,everyone! I used HUAWEI P9 Android 7 and installed the firmware 7_45_77_0_hw for bcm43455, then I installed nexmon app.Unfortunatly, when I used wireshark to capture the csi data, I cannot...

yangtzhs