MrDiy-Audio-Notifier
MrDiy-Audio-Notifier copied to clipboard
ESP32 Can't find wifi
ESP32 Can't find wifi serial port pint:
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1108
load:0x40078000,len:10944
load:0x40080400,len:6388
entry 0x400806b4
Config version: init
Config size: 357
Wrong config version. Applying defaults.
[iwcAll]
|-- [iwcSys]
| |-- 'iwcThingName' with value: 'MrDIYNotifier-c4286f24'
| |-- 'iwcApPassword' with value:
Using No DAC output on ESP32, audio output on pins speaker L & R -> GPIO22 Don't try and drive the speaker pins can't give enough current to drive even a headphone well and you may end up damaging your device SkipApStartup is requested, but either no WiFi was set up, or configButton was pressed. AP password was not set in configuration State changing from: 0 to 1
Brownout detector was triggered
brownout suggests a weak powersource. try a beefier 5v power brick.