new udev rule example does not work

[BFCE]

setting this:

SUBSYSTEM=="hid", ATTRS{driver}=="hid-t150", ATTR{range}="270", ATTR{gain}="75"

into /etc/udev/rules.d/99-t150-defaults.rules does not do anything

however using this: SUBSYSTEM=="usb", ATTRS{idVendor}=="044f", ATTRS{idProduct}=="b677", ATTR{range}="270"

works fine.

output of dmesg:

[ 238.267581] usb 1-7: new full-speed USB device number 6 using xhci_hcd [ 238.570996] usb 1-7: New USB device found, idVendor=044f, idProduct=b65d, bcdDevice= 1.00 [ 238.571004] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 238.571010] usb 1-7: Product: Thrustmaster FFB Wheel [ 238.571014] usb 1-7: Manufacturer: Thrustmaster [ 238.609066] input: Thrustmaster Thrustmaster FFB Wheel as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.0/0003:044F:B65D.000C/input/input37 [ 238.609241] hid-thrustmaster 0003:044F:B65D.000C: input,hidraw8: USB HID v1.00 Gamepad [Thrustmaster Thrustmaster FFB Wheel] on usb-0000:03:00.0-7/input0 [ 238.628745] Error: Driver 'hid-thrustmaster' is already registered, aborting... [ 238.630988] hid-thrustmaster 0003:044F:B65D.000C: Wheel with model id 0x306 is a Thrustmaster T150RS [ 238.635089] usb 1-7: USB disconnect, device number 6 [ 238.635297] hid-thrustmaster 0003:044F:B65D.000C: Success?! The wheel should have been initialized! [ 239.007508] usb 1-7: new full-speed USB device number 7 using xhci_hcd [ 239.374997] usb 1-7: New USB device found, idVendor=044f, idProduct=b677, bcdDevice= 1.00 [ 239.375006] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 239.375011] usb 1-7: Product: Thrustmaster T150RS [ 239.375015] usb 1-7: Manufacturer: Thrustmaster [ 239.388483] input: Thrustmaster Thrustmaster T150RS as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.0/0003:044F:B677.000D/input/input38 [ 239.388706] hid-t150 0003:044F:B677.000D: input,hidraw8: USB HID v1.11 Joystick [Thrustmaster Thrustmaster T150RS] on usb-0000:03:00.0-7/input0 [ 239.403998] hid-t150 0003:044F:B677.000D: Setup completed! Firmware version is 35