arduino-nRF5 icon indicating copy to clipboard operation
arduino-nRF5 copied to clipboard

Published 20 hours ago • verified publisher icon sandeepmistry

nRF Connect

Open rubens17rodrigues opened this issue 8 months ago • 0 comments

I can't find the device in the app.

Open On-Chip Debugger 0.10.0-dev-00254-g696fc0a (2016-04-09-12:07) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html debug_level: 0 0x4000 adapter speed: 1000 kHz nrf51.cpu: target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x21000000 pc: 0x0001aafc msp: 0x20003fe8 nrf51.cpu: target state: halted target halted due to debug-request, current mode: Thread xPSR: 0xc1000000 pc: 0xfffffffe msp: 0xfffffffc ** Programming Started ** auto erase enabled nrf51.cpu: target state: halted target halted due to breakpoint, current mode: Thread xPSR: 0x61000000 pc: 0x2000001e msp: 0xfffffffc wrote 93184 bytes from file /home/rubens/.arduino15/packages/sandeepmistry/hardware/nRF5/0.8.0/cores/nRF5/SDK/components/softdevice/s110/hex/s110_nrf51_8.0.0_softdevice.hex in 3.859173s (23.580 KiB/s) ** Programming Finished ** ** Verify Started ** nrf51.cpu: target state: halted target halted due to breakpoint, current mode: Thread xPSR: 0x61000000 pc: 0x2000002e msp: 0xfffffffc nrf51.cpu: target state: halted target halted due to breakpoint, current mode: Thread xPSR: 0x61000000 pc: 0x2000002e msp: 0xfffffffc verified 90328 bytes in 0.579845s (152.128 KiB/s) ** Verified OK ** ** Resetting Target ** shutdown command invoked

O sketch usa 32364 bytes (21%) de espaço de armazenamento para programas. O máximo são 151552 bytes. Open On-Chip Debugger 0.10.0-dev-00254-g696fc0a (2016-04-09-12:07) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html debug_level: 0 0x4000 adapter speed: 1000 kHz nrf51.cpu: target state: halted target halted due to debug-request, current mode: Thread xPSR: 0xc1000000 pc: 0x000006d0 msp: 0x000007c0 ** Programming Started ** auto erase enabled nrf51.cpu: target state: halted target halted due to breakpoint, current mode: Thread xPSR: 0x61000000 pc: 0x2000001e msp: 0x000007c0 wrote 32768 bytes from file /tmp/arduino_build_559896/led.ino.hex in 1.381161s (23.169 KiB/s) ** Programming Finished ** ** Verify Started ** nrf51.cpu: target state: halted target halted due to breakpoint, current mode: Thread xPSR: 0x61000000 pc: 0x2000002e msp: 0x000007c0 verified 32564 bytes in 0.213027s (149.281 KiB/s) ** Verified OK ** ** Resetting Target ** shutdown command invoked

IDE Arduino: 1.8.18 Everything seems correct, but I can't see the module in the app. Did I forget something?

rubens17rodrigues avatar Mar 30 '25 15:03 rubens17rodrigues