Doesn't recongnize when charging cable is unplugged

[phippstech]

I have the code on a custom board of mine (the design is based off the kicad design as well) and everything works for the most part except when I unplugged the device, the LED I have for when the (PD_UFP.get_voltage() == PD_V(20.0) && PD_UFP.get_current() >= PD_A(1.5) is true stays lit when I unplug the USBC cable. Here is the code block I have:

`void loop() { //analogWrite(LPWM, 255); int voltage = analogRead(VBATT); PD_UFP.run(); if (PD_UFP.is_power_ready()) {

if (PD_UFP.get_voltage() > PD_V(14.0) && PD_UFP.get_current() >= PD_A(1.5)) 
{
   digitalWrite(LED1,HIGH);        
} 
  else
  {
	  digitalWrite(LED1,LOW);
  }

} } `

[phippstech]

So I printed the PD_UFP.get_voltage() > PD_V(14.0)

and it remains at the same value when the USBC cable is disconnected. Is that suppose to happen or is suppose to go back to zero?