PD_Micro

PD_Micro copied to clipboard

Where to buy?

3

I know that here is not a place to post that kind of question but I spent couple of hours and could not find a place to order the PD_Micro....

igoralves1

Looking for a system that can output 3v and 12v together from usb-C I saw a picture that had a 3v and 20v lights enabled suggesting that its outputting both?...

digimbyte

I tried an Ugreen Nexode 100W -> no problems I tried an INIU BI-B5 20Ah powerbank. after 10sec without load the Powerbank cycles the power and does not establish PD...

Ueberspannung

Get list of possible voltages/current limits

12

It could be very useful to get all the possible voltages and current limits the power supply supports. The debug output contains such a list, but a method to get...

kaythe

Support for PD 3.1 48V

1

Thank you for the great work! This project is awesome and I will watch it. **Are you planning to integrate support for PD3.1 up to 48V in the near future?**

3dberg

Hey, Great project! Is it possible to get a more detailed BOM? For example, what crystal was used? [Must be matched to the C9 and C10 capacitors] Thanks!

dsirov

Whilst the ATMega32U4 based MCU provides a nice well understood Arduino compatible platform, the idea of a ESP8266 or ESP32 based version with wifi and configuration webpage/API for app based...

Felixrising

Anywhere to buy these currently?

2

CrowdSupply won't even let me place a preorder. :-/

ryancdotorg

Thanks for this project first and foremost! It's exactly what I was looking for. I was hoping to build this and looking at parts on Mouser, but as per the...

Inventor22

PPS defaults to 5V after working correctly for 60 seconds

2

Hi, I have been making use of this library for a project I am working on. I have successfully run it on: nRF52832, nRF52840, and SAMD51, all cortex-M4. Using adafruit...

awc105