openflexure_microscope
openflexure_microscope copied to clipboard
This repository has now moved to GitLab.com/openflexure/openflexure-microscope
There are bits of code around for adding a fluorescence filter cube for epifluorescence imaging. However, this is not documented in the assembly instructions (because it's probably too confusing). It...
It would be ideal if the instructions didn't require photos to be taken every time the parts change, and if we could have diagrams rather than photos (less cluttered). This...
Currently the project is built using a Makefile generated by a Python script ``generate_makefile``, which simply builds every sensible version of every part of the microscope. It would be nice...
could we have a short baseplate that doesn`t accommodate raspberry pi?for enclosure setup that we can build in future
when clicked from page: http://rwb27.github.io/openflexure_microscope/docs/2b_high_resolution_optics_module.html
Working on building the 5.2 release. Not sure choosing a beta release as my first try was a great decision but figured why not go with the latest and give...
When I try different values for x,y,z I noticed that for 500 the motors rotate. But for -500 they do not. When returning to 500, they work again. Power is...
Step 6 at: http://rwb27.github.io/openflexure_microscope/docs/5_motors.html is unclear. I can only guess that the middle motor is the third. but i would need to check..
at: http://rwb27.github.io/openflexure_microscope/docs/2a_basic_optics_module.html Step 7: It is not clear which side of the lens should face inside the dark chamber.
I'm was printing the small gear for the stepper motor, but it's to lose. Is there a way to edit the scad file to make the shaft hole 5,1mm and...