runesmdk

> I can't see any reason why this won't just work if the sequential flag is turned on. It's already tracking crank angle over 720 degrees, so it should really...

> Great feature to be added! I made it work by programmable outputs. > > If VSS lower than 5, pin 51 goes LOW. On launch control setting, activate it...

> Thank you guys!!! > > If you guys like to watch videos, here is my Youtube channel: https://www.youtube.com/c/BossGarage I make videos about speeduino (and more) and showed that some...

> > There's many videos to look through. Can you specify which one? > > Speeduino on Nissan 200sx: https://www.youtube.com/playlist?list=PL45KNTE54f_wvr_l-5jG52W1o28P97YAj Speeduino on dirt bike 125cc: https://www.youtube.com/playlist?list=PL45KNTE54f_xnzlSSqZHpfCisOr2G_bFO Speeduino on Honda engines:...

This speeduino went in a car. As long as we dont stall it, and when it finally syncs up and starts, it runs well. Issue number 2 with basic trigger...

> > > I have analysed the basic distributor behaviour. The problem lies in the way the very first trigger pulse is handled after initialisation. It calculates the value of...

> > Another sorry for a confusing post, I'm afraid. My observation of the initialisation code should have referred to the variable "triggerFilterTime". It is assigned 3 values in succession,...

> > Another sorry for a confusing post, I'm afraid. My observation of the initialisation code should have referred to the variable "triggerFilterTime". It is assigned 3 values in succession,...

> > > This will have no effect on your stalling issue. Have you inhibited the RESET?? Lots of threads on this It doesn't stall while running, but there is...

Try having a look at issue #169 by jmunkdk, he has a logic analyzer output trace of what it sometimes does during engine stall.