Rui Palma

I have exactly the same problem, it will be really usefull to have a "lock to gateway" in device config. Maybe the SNR is a better option to choose the...

I use the :latest docker container, and this problem is gone. I have some strange behaviors with this development branch but I can't do the debug now, I have to...

I'm sorry to validate the commit, I see that the downlinks are been made, and the error is gone, so I thought that the issue is resolved, but that is...

I can confirm that is working super ok on the docker container :latest. But on docker container :stable the reconnecting issue is happening with the above error. I pull both...

Today my docker container :latest updated, and I had to revert to :stable (because the mqtt connector stop working) The same errors appeared, so I can absolutely confirm that the...

If the interface is an AT command set, it must be ASCII and the binary data must be in ASCII HEX. In AT command set, byte 13 (CR) is used...

I believe that, it will however be something different from the “Hayes” standard as it uses text strings by definition. In LoRaWAN every byte counts so I only work with...

I'm not familiar to FUOTA also. AFAIK the image goes to a reserved flash space, so half of the flash must be reserved. I will like OTA fw updates over...

I think the murata should ship with the I-CUBE-LRWAN as default as possible. The I-CUBE-LRWAN as a very nice manual and documentation, and there are a lot of devices in...

AFAIK the CMWX1ZZABZ+LoraWan stack is certified by the LoraWan Alliance: ["Compliant with the LoRa Alliance™ specification protocol, named LoRaWAN® version V1.0.3 March 2018"](https://www.st.com/en/embedded-software/i-cube-lrwan.html#overview) [CMWX1ZZABZ-078](https://lora-alliance.org/sites/default/files/2018-06/16093001_001_lorawan_1.0.1_-_test_report_-_murata_cmwx1zzabz-078.pdf) We don't have a public rep,...