Roman Tyr

> as long as you have a reasonably low number of layers with bridges in them Which is rarely the case unless you print one very simple test object. Bridging...

> By the way, bridge settings seem to not apply to perimeters. depends on settings in general (detect bridging perimeters). Also note there is big difference between thick bridges and...

I suggest you to use g-code substitutions, it should allow you to do it. You will see that it is not good idea to wait somewhere and then return and...

Can we close the issue?

Thank you. I checked the bundle. There is quite a lot of issues with provided bundle, like incorrect using of printer and filament keys in print profile sections (like retraction...

BTW. You can run prusa-slicer-console with --loglevel=5 parameter to check for errors.

@Garr-R Are you planning to update the bundle?

Thanks. I will fix some minor things I found (slient_mode->silent_mode and non-ideal compatible condition for "MakerGear PLA" resulting in two duplicite profiles for Micro). Then I will prepare thumbnails (it...

Profiles are now available for PrusaSlicer 2.6.0-alpha2 and newer (PS2.6.0 can download new vendor on-line). Thank you.

Similar to https://github.com/prusa3d/PrusaSlicer/issues/1054, https://github.com/prusa3d/PrusaSlicer/issues/3744, https://github.com/prusa3d/PrusaSlicer/issues/223, etc. The "Ensure vertical wall thickness" feature was implemented as an alternate implementation of the solid infill on sloping surfaces. When the checkbox is unchecked,...