p-net
p-net copied to clipboard
rtlabs-com
Error class: 0xfd Real-Time Acyclic Protocol； Error code: 0x24 Not decoded
When I run the pn_dev app, I get the info:
** Starting P-Net sample application 0.2.0+v0.2.0-23-ga55fce3-dirty ** Number of slots: 5 (incl slot for DAP module) P-net log level: 4 (DEBUG=0, FATAL=4) App log level: 0 (DEBUG=0, FATAL=4) Max number of ports: 1 Network interfaces: eth0 Button1 file: /home/aheadtechs/Documents/profinet/build/button1.txt Button2 file: /home/aheadtechs/Documents/profinet/build/button2.txt Default station name: rt-labs-dev Management port: eth0 DC:A6:32:6B:E4:F6 Physical port [1]: eth0 DC:A6:32:6B:E4:F6 Hostname: raspberrypi IP address: 192.168.0.2 Netmask: 255.255.255.0 Gateway: 192.168.0.1 Storage directory: /home/aheadtechs/Documents/profinet/build
Init P-Net stack and sample application Profinet signal LED indication. New state: 0 Network script for eth0: Set IP 0.0.0.0 Netmask 0.0.0.0 Gateway 0.0.0.0 Permanent: 1 Hostname: rt-labs-dev Skip setting hostname: true No valid default gateway given. Skipping setting default gateway. Start sample application main loop
Plug DAP module and its submodules Module plug indication Pull old module. API: 0 Slot: 0 Plug module. API: 0 Slot: 0 Module ID: 0x1 "DAP 1" Submodule plug indication. Pull old submodule. API: 0 Slot: 0 Subslot: 1 Plug submodule. API: 0 Slot: 0 Module ID: 0x1 Subslot: 1 Submodule ID: 0x1 "DAP Identity 1" Data Dir: NO_IO In: 0 bytes Out: 0 bytes Submodule plug indication. Pull old submodule. API: 0 Slot: 0 Subslot: 32768 Plug submodule. API: 0 Slot: 0 Module ID: 0x1 Subslot: 32768 Submodule ID: 0x8000 "DAP Interface 1" Data Dir: NO_IO In: 0 bytes Out: 0 bytes Submodule plug indication. Pull old submodule. API: 0 Slot: 0 Subslot: 32769 Plug submodule. API: 0 Slot: 0 Module ID: 0x1 Subslot: 32769 Submodule ID: 0x8001 "DAP Port 1" Data Dir: NO_IO In: 0 bytes Out: 0 bytes Done plugging DAP
Waiting for PLC connect request
Network script for eth0: Set IP 192.168.0.2 Netmask 255.255.255.0 Gateway 192.168.0.2 Permanent: 0 Hostname: rt-labs-dev Skip setting hostname: true Module plug indication Pull old module. API: 0 Slot: 1 Plug module. API: 0 Slot: 1 Module ID: 0x32 "DIO 8xLogicLevel" Submodule plug indication. Pull old submodule. API: 0 Slot: 1 Subslot: 1 Plug submodule. API: 0 Slot: 1 Module ID: 0x32 Subslot: 1 Submodule ID: 0x132 "Digital Input/Output" Data Dir: INPUT_OUTPUT In: 1 bytes Out: 1 bytes PLC connect indication. AREP: 1 Event indication PNET_EVENT_STARTUP AREP: 1 Data status indication. AREP: 1 Data status changes: 0x35 Data status: 0x35 Run, Valid, Primary, Normal operation, Evaluate data status PLC write record indication. AREP: 1 API: 0 Slot: 1 Subslot: 1 Index: 123 Sequence: 3 Length: 4 Writing parameter "Demo 1" Bytes: 00 00 00 01 PLC write record indication. AREP: 1 API: 0 Slot: 1 Subslot: 1 Index: 124 Sequence: 4 Length: 4 Writing parameter "Demo 2" Bytes: 00 00 00 02 PLC dcontrol message (The PLC is done with parameter writing). AREP: 1 Command: PRM_END Event indication PNET_EVENT_ABORT AREP: 1 Error class: 0xfd Real-Time Acyclic Protocol Error code: 0x24 Not decoded Setting outputs to default values.
siemens PLC can not use the io correctly. Is there any mistake?
