rstrouse
Pairing not possible with Benthin motor
Hardware
ESP32
Firmware version
v2.4.7
Application version
v2.4.7
What happened? What did you expect to happen?
Hello,
also from my end, thanks a ton for this project of yours. Its amazing.
To my problem, I have 3 Benthin IQ2 motors for my blinds. They have a RTS receiver and are working fine with 56 and 80 bit remotes. Unfortunately, pairing via ESPSomfy RTS was not possible. Therefore I tried to copy the remote which you should not do. But I did so as a test if my wiring was correct etc. That worked like a charme, so no wiring issues here, and I was able to control my blinds. Since I will sell the 56bit remote because it does not allow for tilting with a wheel, I thought if I could clone this remote for ESPSomfy RTS since it will never be here again and I would not mix up any rolling codes. Any suggestion of yours if this would be an option? Or otherwise any troubleshooting tips on how to pair it since the prog button is not working at all even now from the Virtual Remote pane :(
Cheers and have a nice weekend.
How to reproduce it (step by step)
1. Go to...
2. Click on...
...
Logs
