Rene Stange

Thanks @sebastienNEC! I think, @toptensoftware needs an I2C slave on the Raspberry Pi and runs the master on an other type of board. But perhaps your work can be used...

It would be a great help, if you would do the necessary modifications. It's also easier for you to do it, because it's your driver and you are familiar with...

Thanks! I would think OOP here: If the IRQ-driven I2C master "is a" I2C-polling-master (which is the class `CI2CMaster`) then I would inherit it from the polling-master. But it isn't....

Thank you! This looks good. I will test it this evening.

Unfortunately I cannot reproduce this here. Which firmware version do you use in the EEPROM of the RPi 5? BTW. The usbpowerdelay= option belongs to cmdline.txt, but this will not...

Thank you. I've found a problem in the `HWReset()` function of the xHCI driver. It failed, when the controller was already running. I fixed it on the *rpi5* branch. Can...

I can reproduce this problem with one USB flash drive. Please give me some time to sort it out. Thanks for testing.

There is another update on the *rpi5* branch. With this all my USB flash drives do work at the RPi 5. Can you please try your USB device again?

Thanks for testing. There seems still be a problem with the USB support for the RPi 5 (also see the "Supporting the Raspberry Pi 5" discussion). It works under some...

It is unlikely, that Circle will support the VC6. This would be much effort and I don't even know, if the necessary information is available to the public. There are...