ESPHome-OpenTherm

ESPHome-OpenTherm copied to clipboard

Add missing sensors

6

There are several sensors that should be added: 1: Hot water outlet temperature 2: Cold water inlet temperature 3: Fan speed 4: pump revolutions 5: date and time present on...

RP92

Future recommendations / wishes

1

Hi @rsciriano, I wanted to take time to write down the couple things I would like to see improved in your new external component. I love how you are implementing...

foltymat

Hi, I have a baxi nuvola duo-tec ht16 boiler. in the settings, I set parameter P10 to 02 - OT controls only operating temperatures and I have to use on/off...

filipjurik

Tracking boiler error codes

2

Hi, it would be advisable to detect when the boiler is blocked and the block code, plus a button should be added to reset the problem

RP92

external temperature

2

Hello, sorry for my English. my question is if it is possible to send the outside temperature data from a sensor that is inside homeassistant to the boiler. From what...

daninvencions

Boiler temperature fixed on 35 degrees and keeps heating even though the PID is at -300%

6

The main problem is that my heating is still using gas to heat up the heating water even though the PID is -100% or lower; I see heating going on...

Dezorian

Custom component took a long time

3

Hi All, I’m using the diyless master thermostat shield with a wmos D1. And esphome 2023.12.9. Also did try with opentherm library 1.1.5 instead of 1.1.4. But same result. It’s...

Alfagek