homeassistant-benqprojector

homeassistant-benqprojector copied to clipboard

Still intressted to integrate network connection?

22

Hey there @rrooggiieerr ! You mentioned in your readme that: _"The same commands should work over a network connection, but I don't own such projector and have not implemented any...

fabiankrauss

Network connection

6

Hi I have a BenQ TK850i which looks like it might work with this nice integration. I was going to use an rs232 to network adapter would this integration be...

Duff-Box1

TK700STI no input selection

19

Hi - could you implement below commands for source set up *sour=hdmi# *sour=hdmi2# *sour=hdmi3# and way to set particular source at startup ? Also - entity goes offline just after...

pborsiak

Doesn't Appear to Work with BenQ HT3550

7

Integration finds and adds the projector. The projector also turns on when I hit the power button, but it doesn't seem to register any statuses and you can't then turn...

conjalka

not upgrading to Version 0.0.9 seems to be stuck at 0.0.7

9

I am running HA in a Container, but everything else seems good.

ajd-tech

Failed to connect with virtual comport

38

I use `socat pty,link=/dev/virtualcom0,raw tcp:beamerctl:23` on my home assistant installation to make a tcp connection to a tcp2serial converter (hostname "beamerctl") on my Benq W1100. Everything works, I can send...

pkoevesdi

BenQ TK810 Turns on and then changes to unavailable

7

[So](url) i bought a USB to Serial convertor and did a pass trough from proxmox. The integration loads an i can turn on my projector! After 10 seconds, the integration...

davemenkehorst

Stack trace: 2024-09-03 07:58:35.336 ERROR (MainThread) [homeassistant.config_entries] Error setting up entry BenQ w1070/w1250 /dev/ttyUSB0 for benqprojector Traceback (most recent call last): File "/usr/src/homeassistant/homeassistant/config_entries.py", line 604, in async_setup result = await...

mikaelj

issues after upgrade to 0.1.0

24

Hi, After upgrade it worked but after first use power toggle has dissapeared. Tried to readd projector but after picking port and speed unknown error occurs and not possible to...

pborsiak