rroller
Latest update to Dahua 0.9.60 removes previous sensors from HA
I am keying off the "Call Button Pressed" and it worked fine until the upgrade last to 0.9.60. Now that binary_sensor has disappeared from the list of entities under the device (not disabled, flat out gone).
I am using a VTO2202F-P-S2 - Version 4.5111.0000. I have tried to use the BackKeyLights but the binary_sensor I created shows up as 'unknown' - I am looking into that as a workaround but concerned the call button is not available anymore.
Also, I am taking errors on the snap-shots from the door with cgi errors which did not occur before.
Also, when I go to enable motion detection in the HA GUI, (previously on by default before upgrade), I get the below error in HA.
Failed to perform the action switch/turn_on. 500, message='Internal Server Error', url='https://IPADDR/cgi-bin/configManager.cgi?action=setConfig&MotionDetect%5B0%5D.Enable=true&MotionDetect%5B0%5D.DetectVersion=V3.0'
Please let me know if you need more information. Thanks for taking a look at this.
HA Info: Core - 2024.10.4 Supervisor - 2024.10.3 OS - 13.2 Frontend - 20241002.4
Here's what mine looks like... does mine have the sensor that yours is missing?
Yes, no button pressed is showing up any more.
Thanks for responding. Happy to do any troubleshooting you suggest. Also did the update that came out after I submitted this request. I am going to try and pull the PoE to the doorbell and hard reset it. Right now, the door button appears to be inactive when you press you it. I will let you know how that goes.
Thanks again,
Craig
On Sat, Nov 2, 2024 at 12:30 PM Ronnie @.***> wrote:
Here's what mine looks like... does mine have the sensor that yours is missing? image.png (view on web) https://github.com/user-attachments/assets/89bcc2b5-6580-4e15-8751-9cb56f734af8
— Reply to this email directly, view it on GitHub https://github.com/rroller/dahua/issues/409#issuecomment-2453056049, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQIJ54IYGWX475FNZUZUFTDZ6UD3XAVCNFSM6AAAAABQ6LCSHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJTGA2TMMBUHE . You are receiving this because you authored the thread.Message ID: @.***>
Not sure why that button disappeared. I will pull out the installation and try from scratch. This is a brand new install with no restores.
Thx
On Tue, Nov 5, 2024 at 8:41 AM Hib Fam @.***> wrote:
Yes, no button pressed is showing up any more.
Thanks for responding. Happy to do any troubleshooting you suggest. Also did the update that came out after I submitted this request. I am going to try and pull the PoE to the doorbell and hard reset it. Right now, the door button appears to be inactive when you press you it. I will let you know how that goes.
Thanks again,
Craig
On Sat, Nov 2, 2024 at 12:30 PM Ronnie @.***> wrote:
Here's what mine looks like... does mine have the sensor that yours is missing? image.png (view on web) https://github.com/user-attachments/assets/89bcc2b5-6580-4e15-8751-9cb56f734af8
— Reply to this email directly, view it on GitHub https://github.com/rroller/dahua/issues/409#issuecomment-2453056049, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQIJ54IYGWX475FNZUZUFTDZ6UD3XAVCNFSM6AAAAABQ6LCSHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJTGA2TMMBUHE . You are receiving this because you authored the thread.Message ID: @.***>
Removing the Dahua Integration and reinstalling it made no difference.
The old system, with this config, still sees the below items:
- Core 2024.10.2
- Supervisor 2024.11.2
- Operating System 13.1
- Frontend 20241002.3
[image: image.png]
The new system, with this config,shows the below:
- Core - 2024.11.1
- Supervisor - 2024.11.2
- Operating System - 13.2
- Frontend - 20241106.2
[image: image.png]
Not sure if that helps or not, both are different VM's running on the same hardware and same network.
Thanks,
Craig
On Fri, Nov 8, 2024 at 3:42 PM Hib Fam @.***> wrote:
Not sure why that button disappeared. I will pull out the installation and try from scratch. This is a brand new install with no restores.
Thx
On Tue, Nov 5, 2024 at 8:41 AM Hib Fam @.***> wrote:
Yes, no button pressed is showing up any more.
Thanks for responding. Happy to do any troubleshooting you suggest. Also did the update that came out after I submitted this request. I am going to try and pull the PoE to the doorbell and hard reset it. Right now, the door button appears to be inactive when you press you it. I will let you know how that goes.
Thanks again,
Craig
On Sat, Nov 2, 2024 at 12:30 PM Ronnie @.***> wrote:
Here's what mine looks like... does mine have the sensor that yours is missing? image.png (view on web) https://github.com/user-attachments/assets/89bcc2b5-6580-4e15-8751-9cb56f734af8
— Reply to this email directly, view it on GitHub https://github.com/rroller/dahua/issues/409#issuecomment-2453056049, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQIJ54IYGWX475FNZUZUFTDZ6UD3XAVCNFSM6AAAAABQ6LCSHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJTGA2TMMBUHE . You are receiving this because you authored the thread.Message ID: @.***>
I have the same issue. The doorbell_pressed binary sensor has gone.
Also using vto2202f-p-s2
https://github.com/rroller/dahua/issues/417#issuecomment-2466593009