remctl
remctl copied to clipboard
Remote authenticated command execution with ACLs
remctl
Copyright 2015-2022 Russ Allbery [email protected]. Copyright 2002-2014 The Board of Trustees of the Leland Stanford Junior University. This software is distributed under a BSD-style license. Please see the section License below for more information.
Blurb
remctl is a client/server application that supports remote execution of specific commands, using Kerberos GSS-API for authentication. Authorization is controlled by a configuration file and ACL files and can be set separately for each command, unlike with rsh. remctl is like a Kerberos-authenticated simple CGI server, or a combination of Kerberos ssh and sudo without most of the features and complexity of either.
Description
remctl is a client/server application that supports remote execution of specific commands, using Kerberos GSS-API for authentication and confidentiality. The commands a given user can execute are controlled by a configuration file and ACL files and can easily be tightly limited, unlike with rsh. The mapping of command to backend program is done by the configuration file, which allows some additional flexibility compared to ssh command restrictions and works with Kerberos authentications rather than being limited to public key authentications.
remctld is very similar to a CGI server that uses a different network protocol than HTTP, always does strong authentication before executing the desired command, and guarantees the data is encrypted on the network. Alternately, you can think of it as a very simple combination of Kerberos ssh and sudo, without most of the features of both but with simpler authorization.
There are a lot of different client/server systems that do something similar: current packages like gRPC, and a wealth of older systems like rsh, CGI, CERN's arc, and more elaborate systems like MIT's Moira. remctl has the advantage over many of these schemes of using GSS-API and being about as simple as it possibly can be while still being useful. It doesn't require any particular programming language, builds self-contained binaries, and uses as minimal of a protocol as possible.
Both C and Java clients and servers are provided, as well as Perl, PHP,
Python, and Ruby bindings for the C client library. For more information
about the Java client, see java/README
. For more information about the
PHP bindings, see php/README
. For more information about the Python
bindings, see python/README
. For more information about the Ruby
bindings, see ruby/README
.
Also included in the remctl package is an alternate way of running the remctl server: remctl-shell. This program is designed to be run as either a shell or a forced command under ssh, using ssh for authentication and communicating the authentication information to remctl-shell via either environment variables or command-line arguments via the forced command configuration. This version of the server uses simple ssh clients, rather than using the remctl client program or libraries.
remctl was originally written by Anton Ushakov as a replacement for IBM's sysctl, a client/server application with Kerberos v4 authentication that allowed the client to run Tcl code on the server, protected by ACLs. At Stanford, we used sysctl extensively, but mostly only to run external programs, so remctl was developed as a Kerberos v5 equivalent that did only the portions we needed.
Complete protocol documentation is available in docs/protocol.html
.
Also present, as docs/design.html
, is the original design document (now
somewhat out of date).
Requirements
The remctld server and the standard client are written in C and require a
C compiler and GSS-API libraries to build. Both will build against either
MIT Kerberos or Heimdal of any reasonable vintage. remctl will also build
against the Kerberos GSS-API implementation shipped with AIX 5.2 (and
possibly later versions) and the Solaris 10 generic GSS-API library (and
possibly later versions). The remctl_set_ccache
implementation is
improved by building with Kerberos libraries and a GSS-API library that
supports gss_krb5_import_cred
.
The remctld server requires libevent 1.4.x or later. It was only tested with libevent 1.4.13-stable and later, but should work with 1.4.4 or later. It is now only tested with libevent 2.x, so moving to a later version of libevent if possible is recommended.
The remctl server will support regex ACLs if the system supports the POSIX regex API. The remctl server also optionally supports PCRE regular expressions in ACLs. To include that support, the PCRE library (either PCRE2 or PCRE1) is required.
To build the remctl client for Windows, the Microsoft Windows SDK for Windows Vista and the MIT Kerberos for Windows SDK are required, along with a Microsoft Windows build environment (probably Visual Studio). remctl has only been tested with the 3.2.1 MIT Kerberos for Windows SDK. To run the resulting binary, MIT Kerberos for Windows must be installed and configured. The client was tested on Windows XP and Vista and should work on Windows 2000 and up; however, the primary maintainer does not use or test Windows, so it's always possible Windows support has broken. The server is not supported on Windows.
To build the Perl bindings for the C client library, you will need Perl 5.10 or later.
To build the PHP bindings for the C client library, you will need PHP 5.x or later and phpize, plus any other programs that phpize requires. PHP 5.x support has only been tested on 5.2 and 5.3, and PHP support is now only tested on PHP 7.x and later.
To build the Python bindings for the C client library, you will need Python 2.7, or Python 3.1 or later. You will also need the setuptools and pytest modules and, for Python 2, the typing module. Earlier versions may work back to possibly Python 2.3, but are not tested.
To build the Ruby bindings for the C client library, you will need Ruby 1.8 or later (primarily tested with 2.5 and later).
None of the language bindings have been tested on Windows.
A Java client and Java server are available in the java subdirectory, but
they are not integrated into the normal build or built by default. There
is a basic Makefile in that directory that may require some tweaking. It
currently requires the Sun Java JDK (1.4.2, 5, or 6) or OpenJDK 6 or
later. A considerably better Java client implementation is available on
the java
branch in the Git repository but has not yet been merged.
To bootstrap from a Git checkout, or if you change the Automake files and need to regenerate Makefile.in, you will need Automake 1.11 or later. For bootstrap or if you change configure.ac or any of the m4 files it includes and need to regenerate configure or config.h.in, you will need Autoconf 2.64 or later. Perl is also required to generate manual pages from a fresh Git checkout. You will also need pkg-config installed to regenerate configure and xml2rfc to build the formatted protocol documentation.
Building and Installation
You can build and install remctl with the standard commands:
./configure
make
make install
If you are building from a Git clone, first run ./bootstrap
in the
source directory to generate the build files. make install
will
probably have to be done as root. Building outside of the source
directory is also supported, if you wish, by creating an empty directory
and then running configure with the correct relative path.
Solaris users should look at examples/remctld.xml
, an SMF manifest for
running the remctld
daemon.
To also build the Perl bindings for the libremctl client library, pass the
--enable-perl
option to configure
. The Perl module build is handled
by the normal Perl extension build system, and therefore will be built
with compiler flags defined by your Perl installation and installed into
your local Perl module directory regardless of the --prefix
argument to
configure
. To change this, you will need to run perl Makefile.PL
in
the perl
subdirectory of the build tree with appropriate options and
rebuild the module after running make
and before running make install
.
To also build the remctl PECL extension for PHP, pass the --enable-php
option to configure
. The PHP PECL module build is handled by the normal
PHP extension build system and therefore will be installed into your local
PHP module directory. The configure script will look for phpize
on your
PATH
by default; if it's in some other directory, set the PHPIZE
environment variable to the full path or set it on the configure command
line. The configure script for the PECL extension will be run during the
build instead of during configure. This is unfortunately apparently
unavoidable given how the PECL build system works.
To also build the Python bindings for the libremctl client library, pass
the --enable-python
option to configure. The Python module build is
handled by the normal Python extension build system, and therefore will be
installed into your local Python module directory regardless of the
--prefix
argument to configure
. To change this, you will need to run
python setup.py install
by hand in the python
directory with whatever
options you want to use.
To also build the Ruby bindings for the libremctl client library, pass the
--enable-ruby
option to configure. The Ruby module build is handled by
the normal Ruby module build system, and therefore will be installed into
your local Ruby module directory regardless of the --prefix
argument to
configure
. To change this, override the sitedir
variable on the make install
command line, as in:
make install sitedir=/opt/ruby
The remctl build system also supports a few other environment variables
that can be set to control aspects of the Perl, Python, and Ruby binding
build systems. These are primarily only of use when packaging the
software. For more information, a list of the variables, and their
effects, see the comment at the start of Makefile.am
.
The Java client and server aren't integrated with the regular build
system. For information on building and installing them, see
java/README
.
remctl will use pkg-config if it's available to find the build flags for
libevent. You can control which pkg-config binary and paths are used with
the normal pkg-config environment variables of PKG_CONFIG
,
PKG_CONFIG_PATH
, and PKG_CONFIG_LIBDIR
, and you can override the
pkg-config results with LIBEVENT_CFLAGS
and LIBEVENT_LIBS
.
Alternately, you can bypass pkg-config by passing one or more of
--with-libevent
, --with-libevent-include
, and --with-libevent-lib
to
indicate the install prefix, include directory, or library directory.
remctl will automatically build with PCRE support if PCRE2 or PCRE1 are
found. As with libevent, remctl will use pkg-config if it's available to
find the build flags for PCRE2. Use the same variables as documented by
libevent to control which pkg-config is used, and override its results
with PCRE2_CFLAGS
and PCRE2_LIBS
. For PCRE1, the pcre-config
script
will be used. You can set PCRE_CONFIG
to point to a different
pcre-config script, or do similar things as with PATH_KRB5_CONFIG
described below. Alternately, you can bypass pkg-config by passing one or
more of --with-pcre2
, --with-pcre2-include
, --with-pcre2-lib
,
--with-pcre
, --with-pcre-include
, or --with-pcre-lib
to indicate the
install prefix, include directory, or library directory.
remctl will automatically build with GPUT support if the GPUT header and
library are found. You can pass --with-gput
to configure to specify the
root directory where GPUT is installed, or set the include and library
directories separately with --with-gput-include
and --with-gput-lib
.
Normally, configure will use krb5-config
to determine the flags to use
to compile with your Kerberos libraries. To specify a particular
krb5-config
script to use, either set the PATH_KRB5_CONFIG
environment
variable or pass it to configure like:
./configure PATH_KRB5_CONFIG=/path/to/krb5-config
If krb5-config
isn't found, configure will look for the standard
Kerberos libraries in locations already searched by your compiler. If the
the krb5-config
script first in your path is not the one corresponding
to the Kerberos libraries you want to use, or if your Kerberos libraries
and includes aren't in a location searched by default by your compiler,
you need to specify a different Kerberos installation root via
--with-krb5=PATH
. For example:
./configure --with-krb5=/usr/pubsw
You can also individually set the paths to the include directory and the
library directory with --with-krb5-include
and --with-krb5-lib
. You
may need to do this if Autoconf can't figure out whether to use lib
,
lib32
, or lib64
on your platform.
To not use krb5-config
and force library probing even if there is a
krb5-config
script on your path, set PATH_KRB5_CONFIG
to a nonexistent
path:
./configure PATH_KRB5_CONFIG=/nonexistent
krb5-config
is not used and library probing is always done if either
--with-krb5-include
or --with-krb5-lib
are given.
GSS-API libraries are found the same way: with krb5-config
by default if
it is found, and a --with-gssapi=PATH
flag to specify the installation
root. PATH_KRB5_CONFIG
is similarly used to find krb5-config
for the
GSS-API libraries, and --with-gssapi-include
and --with-gssapi-lib
can
be used to specify the exact paths, overriding any krb5-config
results.
Pass --enable-silent-rules
to configure for a quieter build (similar to
the Linux kernel). Use make warnings
instead of make
to build with
full GCC compiler warnings (requires either GCC or Clang and may require a
relatively current version of the compiler).
You can pass the --enable-reduced-depends
flag to configure to try to
minimize the shared library dependencies encoded in the binaries. This
omits from the link line all the libraries included solely because other
libraries depend on them and instead links the programs only against
libraries whose APIs are called directly. This will only work with shared
libraries and will only work on platforms where shared libraries properly
encode their own dependencies (this includes most modern platforms such as
all Linux). It is intended primarily for building packages for Linux
distributions to avoid encoding unnecessary shared library dependencies
that make shared library migrations more difficult. If none of the above
made any sense to you, don't bother with this flag.
Testing
remctl comes with a comprehensive test suite, but it requires some configuration in order to test anything other than low-level utility functions. For the full test suite, you will need to have a keytab that can authenticate to a running KDC. Using a test KDC environment, if you have one, is recommended.
Follow the instructions in tests/config/README
to configure the test
suite.
Now, you can run the test suite with:
make check
If a test fails, you can run a single test with verbose output via:
tests/runtests -o <name-of-test>
Do this instead of running the test program directly since it will ensure that necessary environment variables are set up.
On particularly slow or loaded systems, you may see intermittant failures
from the server/streaming
test because it's timing-sensitive.
The test suite will also need to be able to bind to 127.0.0.1 on port 11119 and 14373 to run test network server programs.
To test anonymous authentication, the KDC configured in the test suite needs to support service tickets for the anonymous identity (not a standard configuration). This test will be skipped if the KDC does not support this.
To test user handling in remctld, you will need the fakeroot
command
(available in the fakeroot
package in Debian and Ubuntu). This test
will be skipped if fakeroot
isn't available.
The following additional Perl modules will be used by the test suite for the main package and the Perl bindings if installed:
- Test::MinimumVersion
- Test::Perl::Critic
- Test::Pod
- Test::Pod::Coverage
- Test::Spelling
- Test::Strict
- Test::Synopsis
All are available on CPAN. Those tests will be skipped if the modules are not available.
To enable tests that don't detect functionality problems but are used to
sanity-check the release, set the environment variable RELEASE_TESTING
to a true value. To enable tests that may be sensitive to the local
environment or that produce a lot of false positives without uncovering
many problems, set the environment variable AUTHOR_TESTING
to a true
value.
Building on Windows
(These instructions are not tested by the author and are now dated. Updated instructions via a pull request, issue, or email are very welcome.)
First, install the Microsoft Windows SDK for Windows Vista if you have not
already. This is a free download from Microsoft for users of "Genuine
Microsoft Windows." The vcvars32.bat
environment provided by Visual
Studio may work as an alternative, but has not been tested.
Next, install the MIT Kerberos for Windows SDK. remctl has been tested with version 3.2.1 but should hopefully work with later versions.
Then, follow these steps:
-
Run the
InitEnv.cmd
script included with the Windows SDK with parameters"/xp /release"
. -
Run the
configure.bat
script, giving it as an argument the location of the Kerberos for Windows SDK. For example, if you installed the KfW SDK in"c:\KfW SDK"
, you should run:configure "c:\KfW SDK"
-
Run
nmake
to start compiling. You can ignore the warnings.
If all goes well, you will have remctl.exe
and remctl.dll
. The latter
is a shared library used by the client program. It exports the same
interface as the UNIX libremctl library.
Support
The remctl web page will always have the current version of this package, the current documentation, and pointers to any additional resources.
For bug tracking, use the issue tracker on GitHub. However, please be aware that I tend to be extremely busy and work projects often take priority. I'll save your report and get to it as soon as I can, but it may take me a couple of months.
Source Repository
remctl is maintained using Git. You can access the current source on GitHub or by cloning the repository at:
https://git.eyrie.org/git/kerberos/remctl.git
or view the repository on the web.
The eyrie.org repository is the canonical one, maintained by the author, but using GitHub is probably more convenient for most purposes. Pull requests are gratefully reviewed and normally accepted.
License
The remctl package as a whole is covered by the following copyright statement and license:
Copyright 2015-2022 Russ Allbery [email protected]
Copyright 2002-2014 The Board of Trustees of the Leland Stanford Junior University
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Some files in this distribution are individually released under different licenses, all of which are compatible with the above general package license but which may require preservation of additional notices. All required notices, and detailed information about the licensing of each file, are recorded in the LICENSE file.
Files covered by a license with an assigned SPDX License Identifier include SPDX-License-Identifier tags to enable automated processing of license information. See https://spdx.org/licenses/ for more information.
For any copyright range specified by files in this package as YYYY-ZZZZ, the range specifies every single year in that closed interval.