Risto

Depends on your radio. E.g. TX16S mkII can have an additional button attached to the back case, where you could route out it's wires below one of the handgrips -...

Would you have more info regarding Walksnail Goggles X head tracker? I read the advertisement, but have zero details about it.

> They claim that they cannot start implementing a headtracker because they do not understand which protocol they should support. I suggested that they support two options: Can you please...

If the top USB-C of TX16S is connected when STM32F429BIT6 resets, it indeed goes into DFU, as BOOT0 is pulled (via voltage divider circuit) by top USB-C VBUS (the +5V...

Tested this PR under Win11 Pro 23H2 64-bit. With the comments and changes I posted above and below this post, all worked (was able to build radio firmware, Companion, Simulator...

Have a look at: https://github.com/EdgeTX/edgetx/pull/4689 (merged to main).

The following project looks promising in this direction, but has been stalled for some time now: https://btwifimod.gitbook.io/ and https://github.com/dlktdr/BTWifiModule

> that requirement really needs to go away! @rotorman we need data 🤗 Thanks to raw unfiltered analog output display in EdgeTX, we could easily use the community to gather...

From the data so far (we are still missing T16, T18, X10. X12S is also represented by a single specimen), we see that a uniform classification borders across radios is...

I tested four of my TX16Ss as well, here the combined results with the detection borders of all of our data:  Looks very good for hard-coded classification borders -...