Risto

> I frankly find that hard to believe. I would think that there is probably another issue at work. I you have an idea what else it could be, would...

Hmm... was not my intention to close this... was just rebasing on top of current main. I likely did something wrong then during rebase. Anyhow, re-opening. Will do some measurements...

I measured the current draw of an Espressif ESP32-DevKitC V4 running `mlrs-wireless-bridge`. The results: TCP mode (while client is connected to it, no data flowing): 240 MHz - 139 mA;...

The question is best formulated other way around - is it mandatory to have a higher clock frequency paired with higher energy consumption or if a lower clock freq. would...

Here two images that might help to understand how the relay mode could be used (just showing two examples, more constellations are possible):  

Best we ask also @wimalopaan and @gagarinlg to check as well, as I'm not a native German speaker, but below how it sounds OK to me: ``` manmod.wav;manual mode;"Handbetrieb" acrmod.wav;acro...

For ESP32 based Bluetooth module, have a look at: https://btwifimod.gitbook.io/

Please also check the return value statement: "Return the internal GPS position or nil if no valid hardware found" I tested and found that getTxGPS() returns nil only if internalgps...

https://edgetx.org/contest_crsf_telem_simulation/

https://edgetx.org/contest_crsf_telem_simulation/