flir_camera_driver
flir_camera_driver copied to clipboard
ros-drivers
roslauch file: ``` ``` When I output the right/camera_raw, it shows [ERROR] [1618405746.078545182]: [SpinnakerCamera::grabImage] Failed to retrieve buffer with error: Spinnaker: Failed waiting for EventData on NEW_BUFFER_DATA event. [-1011] [ERROR]...
Hi, I've been struggling to launch multiple cameras using this node. After some investigation, it appears that launching the node with multiple camera_nodelet_manager was causing the issue. Doing so, the...
Added a launch file _camera_gige.launch_, to allow IP address and subnet configuration for GigE cameras. Also, a few parameters specific to GigE cameras can be tuned : - device link...
Hi there, Does any one know if it's possible to use a trigger signal published on a ROS topic to trigger the camera? If so could you provide an example?...
### Hello, I want to ask a question. **The calibration file was added, but the distortion was not eliminated** ### Reference the following in the launch file： ...
When I tried to make the repo I got the following error: make[2]: *** No rule to make target 'flir_camera_driver/spinnaker_camera_driver/usr/lib/libSpinnaker.so', needed by '/home/deanderosa/catkin_ws/devel/lib/libSpinnakerCameraLib.so'. Stop. make[1]: *** [CMakeFiles/Makefile2:4190: flir_camera_driver/spinnaker_camera_driver/CMakeFiles/SpinnakerCameraLib.dir/all] Error 2...
Hello, We are looking for ROS2 drivers for BlackFly cameras. Any possible option !! Appreciate any response.
Hi, I have a stereo-camera system (2 flir blackfly s usb3 cameras). I use one as primary camera and the other one as secondary camera (Master-slave mode). Use MCU trigger...
I fixed the error to set assigned values of BalanceRatioSelector using this package. The same error was reported before. https://github.com/ros-drivers/flir_camera_driver/issues/30 This issue was temporally solved by setting Continuous or Once,...
Hi, I am using 2 Blackfly S cameras for my application, where I want to trigger the second camera after a 2 second delay of triggering the first camera. The...
