Rory Allen

It looks like the Turing machine has been accidentally removed and master clock not imported from the contrib folder, I think that's the only thing failing now!

To add my 2 cents, as mentioned by @mjaskula in a previous comment, this is a specific implementation of everything being used (JSON formatting etc) so I think it's fine...

The [USB Router](https://www.allensynthesis.co.uk/modules/usb-router.html) now provides front access USB, and reset and bootloader mode can both be forced over REPL, and thus over USB. The EuroPi-X is going to have front...

With the merge of #220 and continuous development of the config system with plans to implement it as an interactive contrib script in the future, I think this project suggestion...

This is now very out of date with the firmware and calibration process, so I'm closing it for now. Bipolar input is planned for the EuroPi X so we can...

KiCad design files are available in #147 including an interactive BOM. The PR is likely to sit unapproved for some time until the design files can be tested with a...

This hasn't had any further reports since the issue was discovered, and there have been a few releases since, so I'm going to mark it as closed and re-open if...

A new hardware revision of the current EuroPi is very unlikely to ever be made, and the X will be using external ADCs with a more carefully chosen range, so...

> A few notes from a recent build using [this iBom](https://htmlpreview.github.io/?https://github.com/Allen-Synthesis/EuroPi/blob/af9ed48553dd8c4875f5742dac55891f504414d2/hardware/kicad/bom/ibom.html) > > * R12-18 as 1k ohm, but the official build guide has those as 4.7k ohm resistors >...

> I assume that you aren't planning on merging this until you've successfully ordered some? If that's the case I'd say mark this as 'draft' and then merge it when...