:information_source: :one: HA forum available there

:information_source: :two: If you would like to use a full integration, please check Carlos's full HomeAssistant integration!

Thanks

• for @elcode for Heat enabled or disabled on two zones
• for @rybber78 for the docker compose YAML

Panasonic Aquaera Smart Cloud integration with MQTT

At home I have a Home Assistant and I would like control my Panasonic Aquarea Heatpump.

This project a transformation layer from Panasonic Smart Cloud with MQTT.

If you satisfied, thanks for buying a coffee for me :)

Requirements

• MQTT server
• Panasonic Smart Cloud registration
• Panasonic Aquarea Wifi Module - Panasonic CZ-TAW1

How to start

Natively

Make

make

Configure

Create a config file copy as config from config.example

The config have to be defined in PANASONIC_AQUAREA_SMART_CLOUD_MQTT_CONFIG environment variable.

If the environment variable not set, the default is: etc/config

Run

$ PANASONIC_AQUAREA_SMART_CLOUD_MQTT_CONFIG="CONFIG_FILE_LOCATION" bin/OS/panasonic-aquarea-smart-cloud-mqtt-OS-ARCH

As continer

Pull

$ docker pull ronhks/panasonic-aquarea-smart-cloud-mqtt

Run

$ docker run --name panasonic-aquarea-smart-cloud-mqtt -v HOST_OS_CONFIG_LOCATION/:/app/etc ronhks/panasonic-aquarea-smart-cloud-mqtt

As daemon add -d option

How to use

The MQTT topic are under the MqttTopicRoot.

Read values

• /outdoor/temp/now - Outdoor temp
• /heat/temp/max - Heating max. temp
• /heat/temp/min - Heating min. temp
• /heat/operation - Heating operation status
  • 0 - OFF
  • 1 - ON
• /heat/operation/set - Change Heating operation status
  • OFF - OFF
  • ON - ON
• /water/temp/now - Actual Hot Water temp
• /water/temp/max - Hot water max. temp.
• /water/temp/min - Hot water min. temp.
• /water/operation - Hot water operation status
  • 0 - OFF
  • 1 - ON
• /water/operation/set - Change Hot water operation status
  • OFF - OFF
  • ON - ON
• /operation - Device operation status
  • 0 - OFF
  • 1 - ON
• /operation/set - Device operation status
  • OFF - OFF
  • ON - ON

Change values

• /water/temp/set - set the HOT WATER temp.

  • sample REQUEST JSON:

    {
      "newTemp" : 42
    }
    

• /water/operation/on - Turn ON the Hot Water

• /water/operation/off - Turn OFF the Hot Water

• /heat/operation/on - Turn ON the heating

• /heat/operation/off - Turn OFF the heating

• /operation/on - Turn ON the device

• /operation/off - Turn OFF the device

• /heat/temp/set - set the HEAT water temp (if this is customizable from your heat pump installer settings). The same temp will be set for first and second zone.

  • sample REQUEST JSON:

    {
      "newTemp" : 42
    }
    

Contributing

Welcome all type of contributing! :)

3rd party libs

Thanks for

• BurntSushi/toml for easier config handling
• eclipse/paho.mqtt.golan for MQTT handling
• sirupsen/logrus for easier logging