pyprocar
pyprocar copied to clipboard
romerogroup
spin texture plot
hi
I am trying to plot spin texture for a non-collinear calculation. But it shows the error with following;
file : PROCAR-repaired
atoms : [-1]
orbitals : [-1]
spin comp. : 1
energy : -1
fermi energy : None
Rec. basis : None
rot. symmetry : 1
origin (trasl.) : [0, 0, 0]
rotation : [0, 0, 0, 1]
masking thres. : None
save figure : None
outcar : OUTCAR
st : True
no_arrows : False
Fermi energy found in outcar file = 1.6073
Bands will be shifted by the Fermi energy = 1.6073
Traceback (most recent call last):
File "test.py", line 12, in
Hello @SUN123RAY ! Thank you for your interest in PyProcar. May I know the command you tried to execute?
hi This is the command
pyprocar.fermi2D('PROCAR-repaired',outcar='OUTCAR',energy=-1.0,st=True, noarrow=True, spin=2)
and the texture that I got is attached here
On Fri, Sep 7, 2018 at 2:33 AM Uthpala Herath [email protected] wrote:
Hello @SUN123RAY https://github.com/SUN123RAY ! Thank you for your interest in PyProcar. May I know the command you tried to execute?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-419283624, or mute the thread https://github.com/notifications/unsubscribe-auth/ATOQFDw3dzvmtjJlFCDkE4mBvmG3IwLbks5uYb7VgaJpZM4WJeoO .
Can you send me your PROCAR and OUTCAR please. I will test to see what is going on. Thanks.
For OUTCAR also I am sharing with google drive https://drive.google.com/file/d/1bucmZub6h3z1BTQBORxELa-00Z9Ofi51/view?usp=sharing
On Mon, Sep 10, 2018 at 9:46 PM Amitava Banerjee [email protected] wrote:
hi Uthpala Thanks for your response. Here are the files. Since PROCAR is really big file, so I am sharing with Google Drive.
https://drive.google.com/file/d/1idbxj3j5Ygh6W2aT4F_-eRq78UjH-AWk/view?usp=sharing
On Sun, Sep 9, 2018 at 3:14 AM Uthpala Herath [email protected] wrote:
Can you send me your PROCAR and OUTCAR please. I will test to see what is going on. Thanks.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-419683515, or mute the thread https://github.com/notifications/unsubscribe-auth/ATOQFJ2RlZm98YSYvkD4rcxecq9nd7r6ks5uZGuPgaJpZM4WJeoO .
@SUN123RAY, I cannot access the google drive contents. Can you please grant me access? Thanks!
yes I already gave. Okay let me check it again.
On Fri, Sep 14, 2018 at 4:10 PM Uthpala Herath [email protected] wrote:
@SUN123RAY https://github.com/SUN123RAY, I cannot access the google drive contents. Can you please grant me access? Thanks!
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421370728, or mute the thread https://github.com/notifications/unsubscribe-auth/ATOQFHncxOmg0awRfn8IsGIonA9Smus_ks5ua7jjgaJpZM4WJeoO .
Please try these link again https://drive.google.com/file/d/1idbxj3j5Ygh6W2aT4F_-eRq78UjH-AWk/view?usp=sharing https://drive.google.com/file/d/1bucmZub6h3z1BTQBORxELa-00Z9Ofi51/view?usp=sharing
On Fri, Sep 14, 2018 at 4:16 PM Amitava Banerjee [email protected] wrote:
yes I already gave. Okay let me check it again.
On Fri, Sep 14, 2018 at 4:10 PM Uthpala Herath [email protected] wrote:
@SUN123RAY https://github.com/SUN123RAY, I cannot access the google drive contents. Can you please grant me access? Thanks!
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421370728, or mute the thread https://github.com/notifications/unsubscribe-auth/ATOQFHncxOmg0awRfn8IsGIonA9Smus_ks5ua7jjgaJpZM4WJeoO .
Thanks, I can download from the first. Can I have the OUTCAR as well?
-Uthpala
On Fri, Sep 14, 2018 at 10:20 AM SUN123RAY [email protected] wrote:
Please try these link again
https://drive.google.com/file/d/1idbxj3j5Ygh6W2aT4F_-eRq78UjH-AWk/view?usp=sharing
https://drive.google.com/file/d/1bucmZub6h3z1BTQBORxELa-00Z9Ofi51/view?usp=sharing
On Fri, Sep 14, 2018 at 4:16 PM Amitava Banerjee [email protected] wrote:
yes I already gave. Okay let me check it again.
On Fri, Sep 14, 2018 at 4:10 PM Uthpala Herath <[email protected]
wrote:
@SUN123RAY https://github.com/SUN123RAY, I cannot access the google drive contents. Can you please grant me access? Thanks!
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421370728, or mute the thread < https://github.com/notifications/unsubscribe-auth/ATOQFHncxOmg0awRfn8IsGIonA9Smus_ks5ua7jjgaJpZM4WJeoO
.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421373740, or mute the thread https://github.com/notifications/unsubscribe-auth/AbebscEkRFAheT05GOWoN7XciS9NXAP9ks5ua7tKgaJpZM4WJeoO .
-- Uthpala Herath Graduate Research Assistant Department of Physics and Astronomy West Virginia University Morgantown, WV 26505
Tel. (304) 216-2535 Email: [email protected] [email protected] [email protected]
I think both are there. I have shared 2 links. Please check.
On Fri, Sep 14, 2018 at 4:41 PM Uthpala Herath [email protected] wrote:
Thanks, I can download from the first. Can I have the OUTCAR as well?
-Uthpala
On Fri, Sep 14, 2018 at 10:20 AM SUN123RAY [email protected] wrote:
Please try these link again
https://drive.google.com/file/d/1idbxj3j5Ygh6W2aT4F_-eRq78UjH-AWk/view?usp=sharing
https://drive.google.com/file/d/1bucmZub6h3z1BTQBORxELa-00Z9Ofi51/view?usp=sharing
On Fri, Sep 14, 2018 at 4:16 PM Amitava Banerjee [email protected] wrote:
yes I already gave. Okay let me check it again.
On Fri, Sep 14, 2018 at 4:10 PM Uthpala Herath < [email protected]
wrote:
@SUN123RAY https://github.com/SUN123RAY, I cannot access the google drive contents. Can you please grant me access? Thanks!
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421370728 , or mute the thread <
https://github.com/notifications/unsubscribe-auth/ATOQFHncxOmg0awRfn8IsGIonA9Smus_ks5ua7jjgaJpZM4WJeoO
.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421373740, or mute the thread < https://github.com/notifications/unsubscribe-auth/AbebscEkRFAheT05GOWoN7XciS9NXAP9ks5ua7tKgaJpZM4WJeoO
.
-- Uthpala Herath Graduate Research Assistant Department of Physics and Astronomy West Virginia University Morgantown, WV 26505
Tel. (304) 216-2535 Email: [email protected] [email protected] [email protected]
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421379992, or mute the thread https://github.com/notifications/unsubscribe-auth/ATOQFE9FU393FotPKkr6wwqCXCy_-4-oks5ua7_9gaJpZM4WJeoO .
hi please try this one again. I have shared it again https://drive.google.com/file/d/1bucmZub6h3z1BTQBORxELa-00Z9Ofi51/view?usp=sharing
On Fri, Sep 14, 2018 at 4:42 PM Amitava Banerjee [email protected] wrote:
I think both are there. I have shared 2 links. Please check.
On Fri, Sep 14, 2018 at 4:41 PM Uthpala Herath [email protected] wrote:
Thanks, I can download from the first. Can I have the OUTCAR as well?
-Uthpala
On Fri, Sep 14, 2018 at 10:20 AM SUN123RAY [email protected] wrote:
Please try these link again
https://drive.google.com/file/d/1idbxj3j5Ygh6W2aT4F_-eRq78UjH-AWk/view?usp=sharing
https://drive.google.com/file/d/1bucmZub6h3z1BTQBORxELa-00Z9Ofi51/view?usp=sharing
On Fri, Sep 14, 2018 at 4:16 PM Amitava Banerjee [email protected] wrote:
yes I already gave. Okay let me check it again.
On Fri, Sep 14, 2018 at 4:10 PM Uthpala Herath < [email protected]
wrote:
@SUN123RAY https://github.com/SUN123RAY, I cannot access the google drive contents. Can you please grant me access? Thanks!
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub < https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421370728>, or mute the thread <
https://github.com/notifications/unsubscribe-auth/ATOQFHncxOmg0awRfn8IsGIonA9Smus_ks5ua7jjgaJpZM4WJeoO
.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421373740, or mute the thread < https://github.com/notifications/unsubscribe-auth/AbebscEkRFAheT05GOWoN7XciS9NXAP9ks5ua7tKgaJpZM4WJeoO
.
-- Uthpala Herath Graduate Research Assistant Department of Physics and Astronomy West Virginia University Morgantown, WV 26505
Tel. (304) 216-2535 Email: [email protected] [email protected] [email protected]
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421379992, or mute the thread https://github.com/notifications/unsubscribe-auth/ATOQFE9FU393FotPKkr6wwqCXCy_-4-oks5ua7_9gaJpZM4WJeoO .
Please check and let me know.
On Fri, Sep 14, 2018 at 4:48 PM Amitava Banerjee [email protected] wrote:
hi please try this one again. I have shared it again
https://drive.google.com/file/d/1bucmZub6h3z1BTQBORxELa-00Z9Ofi51/view?usp=sharing
On Fri, Sep 14, 2018 at 4:42 PM Amitava Banerjee [email protected] wrote:
I think both are there. I have shared 2 links. Please check.
On Fri, Sep 14, 2018 at 4:41 PM Uthpala Herath [email protected] wrote:
Thanks, I can download from the first. Can I have the OUTCAR as well?
-Uthpala
On Fri, Sep 14, 2018 at 10:20 AM SUN123RAY [email protected] wrote:
Please try these link again
https://drive.google.com/file/d/1idbxj3j5Ygh6W2aT4F_-eRq78UjH-AWk/view?usp=sharing
https://drive.google.com/file/d/1bucmZub6h3z1BTQBORxELa-00Z9Ofi51/view?usp=sharing
On Fri, Sep 14, 2018 at 4:16 PM Amitava Banerjee <[email protected]
wrote:
yes I already gave. Okay let me check it again.
On Fri, Sep 14, 2018 at 4:10 PM Uthpala Herath < [email protected]
wrote:
@SUN123RAY https://github.com/SUN123RAY, I cannot access the google drive contents. Can you please grant me access? Thanks!
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub < https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421370728>, or mute the thread <
https://github.com/notifications/unsubscribe-auth/ATOQFHncxOmg0awRfn8IsGIonA9Smus_ks5ua7jjgaJpZM4WJeoO
.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub <https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421373740 , or mute the thread < https://github.com/notifications/unsubscribe-auth/AbebscEkRFAheT05GOWoN7XciS9NXAP9ks5ua7tKgaJpZM4WJeoO
.
-- Uthpala Herath Graduate Research Assistant Department of Physics and Astronomy West Virginia University Morgantown, WV 26505
Tel. (304) 216-2535 Email: [email protected] [email protected] [email protected]
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421379992, or mute the thread https://github.com/notifications/unsubscribe-auth/ATOQFE9FU393FotPKkr6wwqCXCy_-4-oks5ua7_9gaJpZM4WJeoO .
Got it thanks. I'll check and let you know.
On Fri, Sep 14, 2018 at 10:51 AM SUN123RAY [email protected] wrote:
Please check and let me know.
On Fri, Sep 14, 2018 at 4:48 PM Amitava Banerjee [email protected] wrote:
hi please try this one again. I have shared it again
https://drive.google.com/file/d/1bucmZub6h3z1BTQBORxELa-00Z9Ofi51/view?usp=sharing
On Fri, Sep 14, 2018 at 4:42 PM Amitava Banerjee [email protected] wrote:
I think both are there. I have shared 2 links. Please check.
On Fri, Sep 14, 2018 at 4:41 PM Uthpala Herath < [email protected]> wrote:
Thanks, I can download from the first. Can I have the OUTCAR as well?
-Uthpala
On Fri, Sep 14, 2018 at 10:20 AM SUN123RAY [email protected] wrote:
Please try these link again
https://drive.google.com/file/d/1idbxj3j5Ygh6W2aT4F_-eRq78UjH-AWk/view?usp=sharing
https://drive.google.com/file/d/1bucmZub6h3z1BTQBORxELa-00Z9Ofi51/view?usp=sharing
On Fri, Sep 14, 2018 at 4:16 PM Amitava Banerjee < [email protected]
wrote:
yes I already gave. Okay let me check it again.
On Fri, Sep 14, 2018 at 4:10 PM Uthpala Herath < [email protected]
wrote:
@SUN123RAY https://github.com/SUN123RAY, I cannot access the google drive contents. Can you please grant me access? Thanks!
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub < https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421370728>, or mute the thread <
https://github.com/notifications/unsubscribe-auth/ATOQFHncxOmg0awRfn8IsGIonA9Smus_ks5ua7jjgaJpZM4WJeoO
.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub < https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421373740 , or mute the thread <
https://github.com/notifications/unsubscribe-auth/AbebscEkRFAheT05GOWoN7XciS9NXAP9ks5ua7tKgaJpZM4WJeoO
.
-- Uthpala Herath Graduate Research Assistant Department of Physics and Astronomy West Virginia University Morgantown, WV 26505
Tel. (304) 216-2535 Email: [email protected] [email protected] [email protected]
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421379992 , or mute the thread < https://github.com/notifications/unsubscribe-auth/ATOQFE9FU393FotPKkr6wwqCXCy_-4-oks5ua7_9gaJpZM4WJeoO
.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421383336, or mute the thread https://github.com/notifications/unsubscribe-auth/AbebsbEDNtu3GsUljjMurOCdV77WBSbUks5ua8JfgaJpZM4WJeoO .
-- Uthpala Herath Graduate Research Assistant Department of Physics and Astronomy West Virginia University Morgantown, WV 26505
Tel. (304) 216-2535 Email: [email protected] [email protected] [email protected]
Hello @SUN123RAY, The PROCAR file is too large for PyProcar to process at once. This is why PyProcar has a method called "filter" which allows you to filter the bands you need. Have you tried doing that?
-Uthpala
Yes I have tried with that also.
On Fri, Sep 14, 2018 at 9:53 PM Uthpala Herath [email protected] wrote:
Hello @SUN123RAY https://github.com/SUN123RAY, The PROCAR file is too large for PyProcar to process at once. This is why PyProcar has a method called "filter" which allows you to filter the bands you need. Have you tried doing that?
-Uthpala
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421467071, or mute the thread https://github.com/notifications/unsubscribe-auth/ATOQFCuL6LoqIXGp3Ls6GF-DbaZ6zV-2ks5ubAksgaJpZM4WJeoO .
What bands have you filtered?
On Fri, Sep 14, 2018 at 3:54 PM SUN123RAY [email protected] wrote:
Yes I have tried with that also.
On Fri, Sep 14, 2018 at 9:53 PM Uthpala Herath [email protected] wrote:
Hello @SUN123RAY https://github.com/SUN123RAY, The PROCAR file is too large for PyProcar to process at once. This is why PyProcar has a method called "filter" which allows you to filter the bands you need. Have you tried doing that?
-Uthpala
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421467071, or mute the thread < https://github.com/notifications/unsubscribe-auth/ATOQFCuL6LoqIXGp3Ls6GF-DbaZ6zV-2ks5ubAksgaJpZM4WJeoO
.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421467411, or mute the thread https://github.com/notifications/unsubscribe-auth/AbebsdI5kBLUMLr9u7jpcx0yXfy7nIqcks5ubAl7gaJpZM4WJeoO .
-- Uthpala Herath Graduate Research Assistant Department of Physics and Astronomy West Virginia University Morgantown, WV 26505
Tel. (304) 216-2535 Email: [email protected] [email protected] [email protected]
I guess for spin texture it is more interested to see at VBM and CBM, which is for my case, I guess band 132/133. If you want I can send the PROCAR-repaired file, that is created using "filter".
On Fri, Sep 14, 2018 at 9:53 PM Amitava Banerjee [email protected] wrote:
Yes I have tried with that also.
On Fri, Sep 14, 2018 at 9:53 PM Uthpala Herath [email protected] wrote:
Hello @SUN123RAY https://github.com/SUN123RAY, The PROCAR file is too large for PyProcar to process at once. This is why PyProcar has a method called "filter" which allows you to filter the bands you need. Have you tried doing that?
-Uthpala
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421467071, or mute the thread https://github.com/notifications/unsubscribe-auth/ATOQFCuL6LoqIXGp3Ls6GF-DbaZ6zV-2ks5ubAksgaJpZM4WJeoO .
That would be very helpful. Please send me that so that I can test.
Thanks.
On Fri, Sep 14, 2018 at 4:05 PM SUN123RAY [email protected] wrote:
I guess for spin texture it is more interested to see at VBM and CBM, which is for my case, I guess band 132/133. If you want I can send the PROCAR-repaired file, that is created using "filter".
On Fri, Sep 14, 2018 at 9:53 PM Amitava Banerjee [email protected] wrote:
Yes I have tried with that also.
On Fri, Sep 14, 2018 at 9:53 PM Uthpala Herath <[email protected]
wrote:
Hello @SUN123RAY https://github.com/SUN123RAY, The PROCAR file is too large for PyProcar to process at once. This is why PyProcar has a method called "filter" which allows you to filter the bands you need. Have you tried doing that?
-Uthpala
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421467071, or mute the thread < https://github.com/notifications/unsubscribe-auth/ATOQFCuL6LoqIXGp3Ls6GF-DbaZ6zV-2ks5ubAksgaJpZM4WJeoO
.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421470046, or mute the thread https://github.com/notifications/unsubscribe-auth/AbebsRcxQ5WvFwe1_QNk-1Y_AYgatmi6ks5ubAv8gaJpZM4WJeoO .
-- Uthpala Herath Graduate Research Assistant Department of Physics and Astronomy West Virginia University Morgantown, WV 26505
Tel. (304) 216-2535 Email: [email protected] [email protected] [email protected]
Yes sure. Please give me some time to upload,
On Fri, Sep 14, 2018 at 10:06 PM Uthpala Herath [email protected] wrote:
That would be very helpful. Please send me that so that I can test.
Thanks.
On Fri, Sep 14, 2018 at 4:05 PM SUN123RAY [email protected] wrote:
I guess for spin texture it is more interested to see at VBM and CBM, which is for my case, I guess band 132/133. If you want I can send the PROCAR-repaired file, that is created using "filter".
On Fri, Sep 14, 2018 at 9:53 PM Amitava Banerjee [email protected] wrote:
Yes I have tried with that also.
On Fri, Sep 14, 2018 at 9:53 PM Uthpala Herath < [email protected]
wrote:
Hello @SUN123RAY https://github.com/SUN123RAY, The PROCAR file is too large for PyProcar to process at once. This is why PyProcar has a method called "filter" which allows you to filter the bands you need. Have you tried doing that?
-Uthpala
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421467071 , or mute the thread <
https://github.com/notifications/unsubscribe-auth/ATOQFCuL6LoqIXGp3Ls6GF-DbaZ6zV-2ks5ubAksgaJpZM4WJeoO
.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421470046, or mute the thread < https://github.com/notifications/unsubscribe-auth/AbebsRcxQ5WvFwe1_QNk-1Y_AYgatmi6ks5ubAv8gaJpZM4WJeoO
.
-- Uthpala Herath Graduate Research Assistant Department of Physics and Astronomy West Virginia University Morgantown, WV 26505
Tel. (304) 216-2535 Email: [email protected] [email protected] [email protected]
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421470417, or mute the thread https://github.com/notifications/unsubscribe-auth/ATOQFPh0Q3EJm7Z0Bq4aDAls3U4jx1O4ks5ubAxTgaJpZM4WJeoO .
Take your time :)
On Fri, Sep 14, 2018 at 4:14 PM SUN123RAY [email protected] wrote:
Yes sure. Please give me some time to upload,
On Fri, Sep 14, 2018 at 10:06 PM Uthpala Herath [email protected] wrote:
That would be very helpful. Please send me that so that I can test.
Thanks.
On Fri, Sep 14, 2018 at 4:05 PM SUN123RAY [email protected] wrote:
I guess for spin texture it is more interested to see at VBM and CBM, which is for my case, I guess band 132/133. If you want I can send the PROCAR-repaired file, that is created using "filter".
On Fri, Sep 14, 2018 at 9:53 PM Amitava Banerjee <[email protected]
wrote:
Yes I have tried with that also.
On Fri, Sep 14, 2018 at 9:53 PM Uthpala Herath < [email protected]
wrote:
Hello @SUN123RAY https://github.com/SUN123RAY, The PROCAR file is too large for PyProcar to process at once. This is why PyProcar has a method called "filter" which allows you to filter the bands you need. Have you tried doing that?
-Uthpala
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub < https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421467071 , or mute the thread <
https://github.com/notifications/unsubscribe-auth/ATOQFCuL6LoqIXGp3Ls6GF-DbaZ6zV-2ks5ubAksgaJpZM4WJeoO
.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub <https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421470046 , or mute the thread <
https://github.com/notifications/unsubscribe-auth/AbebsRcxQ5WvFwe1_QNk-1Y_AYgatmi6ks5ubAv8gaJpZM4WJeoO
.
-- Uthpala Herath Graduate Research Assistant Department of Physics and Astronomy West Virginia University Morgantown, WV 26505
Tel. (304) 216-2535 Email: [email protected] [email protected] [email protected]
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421470417, or mute the thread < https://github.com/notifications/unsubscribe-auth/ATOQFPh0Q3EJm7Z0Bq4aDAls3U4jx1O4ks5ubAxTgaJpZM4WJeoO
.
— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/uthpalah/PyProcar/issues/5#issuecomment-421472129, or mute the thread https://github.com/notifications/unsubscribe-auth/AbebsSEY-MrspKhFi0ag2F6wpyenlHRTks5ubA4VgaJpZM4WJeoO .
-- Uthpala Herath Graduate Research Assistant Department of Physics and Astronomy West Virginia University Morgantown, WV 26505
Tel. (304) 216-2535 Email: [email protected] [email protected] [email protected]
Hello @SUN123RAY ! Thank you for your interest in PyProcar. May I know the command you tried to execute?
Yes sure. Please give me some time to upload, On Fri, Sep 14, 2018 at 10:06 PM Uthpala Herath [email protected] wrote: … That would be very helpful. Please send me that so that I can test. Thanks. On Fri, Sep 14, 2018 at 4:05 PM SUN123RAY @.> wrote: > I guess for spin texture it is more interested to see at VBM and CBM, > which is for my case, I guess band 132/133. If you want I can send the > PROCAR-repaired file, that is created using "filter". > > On Fri, Sep 14, 2018 at 9:53 PM Amitava Banerjee @.> > wrote: > > > Yes I have tried with that also. > > > > On Fri, Sep 14, 2018 at 9:53 PM Uthpala Herath < @.*** > > > > wrote: > > > >> Hello @SUN123RAY https://github.com/SUN123RAY, > >> The PROCAR file is too large for PyProcar to process at once. This is > why > >> PyProcar has a method called "filter" which allows you to filter the > bands > >> you need. Have you tried doing that? > >> > >> -Uthpala > >> > >> — > >> You are receiving this because you were mentioned. > >> Reply to this email directly, view it on GitHub > >> <#5 (comment) >, > >> or mute the thread > >> < > https://github.com/notifications/unsubscribe-auth/ATOQFCuL6LoqIXGp3Ls6GF-DbaZ6zV-2ks5ubAksgaJpZM4WJeoO > > > >> . > >> > > > > — > You are receiving this because you modified the open/close state. > Reply to this email directly, view it on GitHub > <#5 (comment)>, > or mute the thread > < https://github.com/notifications/unsubscribe-auth/AbebsRcxQ5WvFwe1_QNk-1Y_AYgatmi6ks5ubAv8gaJpZM4WJeoO > > . > -- Uthpala Herath Graduate Research Assistant Department of Physics and Astronomy West Virginia University Morgantown, WV 26505 Tel. (304) 216-2535 Email: @.*** @.> @. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#5 (comment)>, or mute the thread https://github.com/notifications/unsubscribe-auth/ATOQFPh0Q3EJm7Z0Bq4aDAls3U4jx1O4ks5ubAxTgaJpZM4WJeoO . Could you @SUN123RAY @uthpalaherath please help me with pyprocar?
