[Support request] Yi Pro 2K Home YFUS 12.0.51

[b-a-9-0]

Hi, I have a Yi Pro 2K Home

• Serial YFUS....
• Base Version 12.0.51.01_202303091901

For curiosity I tried to apply the hack with y623. It kind of works (Web Interface, SSH, ...) but I have some problems with the RTSP streams. Low quality stream sometimes works, but not very stable, the high res stream does not work at all. Is there any advice what I can try to get this model running? Thanks for this great work!

[roleoroleo]

Please, send me a copy of the frame buffer. /dev/shm/fshare_frame_buf I will check the stream.

[b-a-9-0]

Please see the buffer attached. fshare_frame_buf.zip

[roleoroleo]

I can confirm that y623 should work. The stream is supported. But I don't remember if I implemented some change after the last release, for this model. Please try this image: y623_0.3.0.tar.gz

[b-a-9-0]

Hi, this image worked, thanks. I think you can add this camera version to the list of supported devices.

[isibizi]

I had the same problems with this cam, i have solve my problems after i have formated my sdcard with "EaseUS Partition Master" and use Fat32 and GPT, after that my cameras worked fine

[Tribux]

Hi, have same model but ZFUS, it seems to work, but it has many restarts during work, mostly when I try to access preview(rtsp/onvif). Does same firmware should work without issues on this device? MOdel is YYS.62121 SN starts with ZY623

UPDATE: In fact solution suggested by @isibizi helped and for at least now, no restarts of cam and rtsp preview possible :)

[redlingg]

Hi, have same model but ZFUS, it seems to work, but it has many restarts during work, mostly when I try to access preview(rtsp/onvif). Does same firmware should work without issues on this device? MOdel is YYS.62121 SN starts with ZY623

UPDATE: In fact solution suggested by @isibizi helped and for at least now, no restarts of cam and rtsp preview possible :)

Hello which fw do u use? I dont find any for ZFUS. thnaks (yi home 2k pro)

[roleoroleo]

Which firmware version?

[redlingg]

Which firmware version?

Is this question for me..? :)

[roleoroleo]

Which firmware version?

Is this question for me..? :)

Yes, tell me the fw version that appears in the app.

[redlingg]

Which firmware version?

Is this question for me..? :)

Yes, tell me the fw version that

Which firmware version?

Is this question for me..? :)

Yes, tell me the fw version that appears in the app.

Thanks.

12.0.51.0_202303091901 Can be upgraded to: 12.0.51.04_202311171457

[roleoroleo]

Try y623. It should work.

[redlingg]

Try y623. It should work.

well it works but gives me a fish eye image... so it is not really good

[roleoroleo]

Is the image different from the one in the app? If yes, please send me a copy of the frame buffer: /dev/shm/fshare_frame_buf

[redlingg]

Is the image different from the one in the app? If yes, please send me a copy of the frame buffer: /dev/shm/fshare_frame_buf

it is the same.. :( I dont understand why.

[redlingg]

Is the image different from the one in the app? If yes, please send me a copy of the frame buffer: /dev/shm/fshare_frame_buf

it is the same.. :( I dont understand why.

….now I am. not able to reach the admin site. Can this be because of the se card?

[roleoroleo]

Maybe Simply create again the sd.

[redlingg]

Hello

I changed the card. Sometimes the picture gets pixel. At the same time I get notification from home assistant and that photo is ok. The view in motioneye is also pixeled. Then sometime it is ok. Any suggestion? Thanks

[roleoroleo]

If the image quality is the same as in the app it is probably a camera problem.

[Tribux]

Which firmware version?

Hi sorry for late reply, i Just used firmware for Y vesrsion but doing preview through rtsp or onvif I get pixels sometimes, need to either restart or open app few times..

[roleoroleo]

Please. Tell me the fw revision that appears in the webgui: field "Base Version".

[Tribux]

Please. Tell me the fw revision that appears in the webgui: field "Base Version".

Base version is: 12.0.51.04_202311171457

[roleoroleo]

Please, wait for the next release.

[redlingg]

Hi Can you tell me why I have picture like this? Sometime it is ok, sometime it looks like this:

[roleoroleo]

There can be many reasons for this problem.

• hardware damage
• network connection
• bug in the software
• bug in the hack

Please, try if this beta is better: y623_0.3.0.tar.gz

[lenisko]

Hey @roleoroleo

I tried the one above with both 12.0.51.01_202303091901, 12.0.51.04_202311171457 and card formated through app but camera record is freezing a loot, same goes for RTSP stream.

If there's anything I could provide to get this tuned, just let me know! Cheers.

[roleoroleo]

Please, send me a copy of the buffer /dev/shm/fshare_frame_buf

[lenisko]

@roleoroleo

count=1; version="12.0.51.04_202311171457"; model="YFUSY94"; while [ $count -le 9 ]; do cat /dev/shm/fshare_frame_buf > "/tmp/${version}_${model}_fshare_frame_buf_${count}"; count=$((count+1)); sleep 5; done

fshare_frame_buf.zip (both fw) rRTSPServer_log.txt (12.0.51.01_202303091901)

Size is different between firmware versions. Executed on both, 9 files each. Also attached a log of rRTSPServer for a case where video was working, froze, and started working again.

[roleoroleo]

The frame buffer is ok and supported, both for 12.0.51.01 and 12.0.51.04. The size is not a problem.

The log shows a problem near time 1705403439422, but I don't understand the type of problem. Could you please create another log with -d 15? Does low res stream work?

[lenisko]

Looks like the issue is present on both streams

killall wd_rtsp.sh
killall rRTSPServer
rRTSPServer -m y623 -r high -p 554 -d 15 &> /tmp/high-res-debug.txt
rRTSPServer -m y623 -r low -p 554 -d 15 &> /tmp/low-res-debug.txt

• high-res-debug.txt
• low-res-debug.txt