EZ-WifiBroadcast issues

TP-Link v3 not recognized

2

Installed EZ-WifiBroadcast on Raspberri Pi 3 and connected TP-Link v3 to it. The Wifi dongle is not recognized. Please advice what action to be taken.

bpjdons

1.6RC6 release image doesn't boot on RPI Zero 2 W

2

RPI Zero 2 W (same BCM chip as RPI 3b) doesn't boot at all with the SD card image. It is as if there was no SD card present. Same...

lukolszewski

Joystick buttons

2

How do you define joystick buttons in the joystick.txt file

Howie9600

Strong Video Noises

1

Hi, I will start with a short introduction so that you understand what I mean. I have installed EZ-WifiBroadCast on a ground robot and it does not work in any...

PIONNER-cmd

Hi, Can i know, what folder contains wifibroadcast with mavlink support. The "wifibroadcast_rc" folder contains code for RC through joystics what about sending MAVLINK messages? . What folders and source...

Mas313

IDE

How to build compiling environment in Windows

cruiseou

Huge delay in RC control

I wired everything according to the instructions My setup: Air PI: - Raspberry PI Zero v1.3 - Raspberry Camera Rev. 1.3 - D-Link DWA-123 with RT5372 chipset Ground PI: -...

F33RNI

Boot Partition Needs Updating

The boot partition of the ezwifi broadcast image needs updating to contain the device tree boot files for newer models (and in some cases older models) of Raspberry Pi. I...

TheMindVirus