Does not works with BenQ EL2870U

[pasnox]

The UI is only filled by tool output which is barely readable.

shell output:

ddcui: Applying combined options:
(set_connector_for_businfo_using_edid)           Failed to find connector name for /dev/i2c-8 using EDID 0x1fa6d7f4
Failed to find connector name for /dev/i2c-8, set_connector_for_businfo_using_edid at line 1236 in file i2c_bus_core.c.
I2C_Bus_Info at: 0x1fa6de10
Flags:                   I2C_BUS_EXISTS | I2C_BUS_ACCESSIBLE | I2C_BUS_PROBED | I2C_BUS_X50_EDID
Bus /dev/i2c-8 found:   true
Bus /dev/i2c-8 probed:  true
errno for open:          OK(0): success
drm_connector_found_by:  DRM_CONNECTOR_NOT_CHECKED (0)
last_checked_asleep:       false
Display connectors reported by /sys:
Connector:    card1-HDMI-A-1
i2c_busno:    1
connector_id: 110
name:         (null)
enabled:      disabled
status:       disconnected
edid:         None
Connector:    card1-HDMI-A-2
i2c_busno:    3
connector_id: 116
name:         (null)
enabled:      disabled
status:       disconnected
edid:         None
Connector:    card1-DP-1
i2c_busno:    4
connector_id: 99
name:         (null)
enabled:      disabled
status:       disconnected
edid:         None
libddcutil: Options passed from client:
libddcutil: Applying combined libddcutil options:
Error(s) opening ddc devices
Error EACCES(-13): Permission denied opening /dev/i2c-1
Error EACCES(-13): Permission denied opening /dev/i2c-2
Error EACCES(-13): Permission denied opening /dev/i2c-3
Error EACCES(-13): Permission denied opening /dev/i2c-4

[pasnox]

Nevermind, works fine. I just need to explicitly goes in the features view manually everytime. The other view have text rendering issue though.