Rockusb and fastboot command

[pro777s]

Hello! Thanks for your work. I'm build Rockchip U-boot 2017-09-rc4. What is the cause of the error when trying to use a rockusb command or fastboot?

U-Boot 2017.09-01464-gc9fcc18-dirty (Apr 10 2018 - 20:07:14 +0300)

Model: Q8-V10-RK3288
DRAM:  2 GiB
Relocation Offset is: 7ef6a000
MMC:   dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0
*** Warning - bad CRC, using default environment
In:    serial
Out:   serial
Err:   serial
Model: Q8-V10-RK3288
fastboot key pressed!
Setting reboot to fastboot flag ...
switch to partitions #0, OK
mmc0(part 0) is current device
Net:
Warning: ethernet@ff290000 (eth0) using random MAC address - ce:b3:e0:44:17:9a
eth0: ethernet@ff290000
starting USB...
USB0:   Core Release: 3.10a
USB1:   Core Release: 3.10a
scanning bus 0 for devices... 4 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
Hit any key to stop autoboot:  0
=> rockusb 0 usb 0
RKUSB: LUN 0, dev 0, hwpart 0, sector 0x0, count 0xe73040
### ERROR ### Please RESET the board ###

Replacing command parameters no error does fix.

[fortunerains]

我也遇到了 楼主解决了吗