roby70cr

this is what I get if I use the upload via the web interface (using the ip address of the nspanel) > 22:18:42 | [D] | [button:010] | 'nspanel Update...

I can't now, but it's the same as in this post. As you said it's possibly a leftover from a Tasmota install https://github.com/Blackymas/NSPanel_HA_Blueprint/issues/685#top https://user-images.githubusercontent.com/60267409/249266497-c02f2c48-bdb1-4765-8f3d-4968077a67d0.jpg

yes, that's the one edit: tried also wirh 9600 baud rate but no resutl

of course, I do appreciate your help so far, whenever you have time. I'll go to rest too, thanks for now!

thanks edward, I have done all of the above without success. I guess either there's a hardware issue or it's me doing something wrong. these are the steps I take,...

hi deejaybeam, the issue is trying to upload the tft file, whenever and however I try to upload it, via web interface, via ha device management, via ha service call,...

UPDATE I decided to try and upload the nspanel_eu.tft via the nextion editor, using the two pins on the board  soldered two pins but one was torn off while...

HA found a new device.....  guess I have to install this first? (gosh, seems one of those endless tv series, where there's a new plot twist around every corner...

> Looks good with TFT, but now you have to install ESPHome. Installed ESPHome on the panel, either wirelessly and via usb adapter, but nothing changed.... I do not know...

this is what I see in ESPhome. Upload and install apparently work, but no changes in the display. could it be because of the nextion being disconnected? INFO ESPHome 2023.9.3...