Robert Klep

Yeah that, or perhaps set the measured temperature to the target temperature (although that might even be more confusing than just using "0" as default).

Only my iPad is running 13.5 (iPadOS) at the moment, and that seems to be working fine. Try doing a full reset (Homeykit app settings, "Settings" tab, "Clear HomeKit storage...

Which specific app are you using to control the curtains? 3.0.16 contains some changes to how curtains are being handled (to fix problems with _other_ apps), so I have to...

For some reason, the driver add the `windowcoverings_set` capability to the device, but doesn't use actually use it. This confuses Homeykit. I'll ask @tedtolboom about it.

@kmarosi I added a workaround, can you check if this fixes your problem? https://homey.app/a/com.swttt.homekit/test/

@kmarosi I don't really see how Homeykit can cause that sort of behaviour. Do you know which version were running previous to 3.0.16? Do you know how to use the...

@kmarosi instructions on how to install an app through the CLI are here: https://community.athom.com/t/how-to-cli-install-method/198 Just to make sure that 3.0.15 still works for you, go to [this URL](https://github.com/swttt/com.swttt.homekit/tree/988c4c797feb82df998549dc377562e76717c00a), click the...

@kmarosi start by taking Homey off power for about 10 minutes and see if it works again after that. I assume that the device works okay when you control it...

Are you still testing with 3.0.15? `homey app run` doesn't install the app, so it will revert back to 3.0.16 after a reboot until you manually run 3.0.15 again.

Just to be sure, just run 3.0.15 manually from the CLI and it should be fine. No need to reboot.