Robert Klep

The XMPP authentication failure points to the use of an invalid serial number or access key argument. The issues that you're linking to had to do with some backend changes...

I doubt it's a server side issue, because it's working just fine for me. Back in 2018, it stopped working for everyone. You could install the CLI tool on your...

@Eddie-BS like I said in [my comment](https://github.com/robertklep/nefit-easy-http-server/issues/39#issuecomment-522318713): if this is the problem, the Easy isn't the only device that has it. Of course, it's absolutely annoying, and I doubt that...

MicroTik is pretty well configurable, right? Perhaps you can disable band steering? Or _enable_ band steering instead of lowering 2.4Ghz TX power?

@Joost996me judging by the output, the CLI is working just fine. Since the CLI and the HTTP server use the same underlying code, I don't see anything other than a...

You could try [this module](https://github.com/robertklep/bosch-xmpp/). If you install it globally (`npm install bosch-xmpp -g`), it will install a command line tool that you can use to check if perhaps the...

Speaking for the Nefit Easy: the serial number is 9 digits, the access key is 16 alphanumerical characters, and password I can't remember (but should be setable from the app)....

You can run with debug logging enabled: ``` env DEBUG=* bosch-xmpp --serial=XXX --access-key=YYY --password=ZZZ nefit get /ecus/rrc/uiStatus ``` But I'm fairly sure that if it says "XMPP authentication error", it's...

@marcews I extracted this list from the Nefit app: ``` [ "/application/tbso/electricity/tariffID", "/application/tbso/enable", "/dhwCircuits", "/dhwCircuits/dhw1", "/dhwCircuits/dhw1/actualTemp", "/dhwCircuits/dhw1/charge", "/dhwCircuits/dhw1/chargeDuration", "/dhwCircuits/dhw1/currentSetpoint", "/dhwCircuits/dhw1/operationMode", "/dhwCircuits/dhw1/singleChargeSetpoint", "/dhwCircuits/dhw1/status", "/dhwCircuits/dhw1/switchPrograms", "/dhwCircuits/dhw1/switchPrograms/A", "/dhwCircuits/dhw1/temperatureLevels", "/dhwCircuits/dhw1/temperatureLevels/high", "/dhwCircuits/dhw1/temperatureLevels/low", "/dhwCircuits/dhw1/temperatureLevels/off", "/dhwCircuits/dhw1/waterFlow", "/dhwCircuits/dhw1/workingTime",...

I don't have that app, or know how to get it :(