void_switch
void_switch copied to clipboard
riskable
3D printable magnetic separation contactless key switch and stabilizers (OpenSCAD files)
Setting `MAGNET_WALL_THICKNESS` changes the body, but in the sheath, the value is hard-coded, creating issues with snapping the sheath and body together when this value is changed - especially decreased....
Hi! do you have the dimensions of the switch? of any of the parts When I print it, the keycap mount is much smaller than the mount in the stem,...
I want to make a one-handed chording keyboard using these switches. They need to be at slight angles to each other to reflect the angle of movement of the fingers....
For whatever reason, I'm having a very hard time getting the sheath to snap in to the body with 5x2mm magnets. I've adjusted every setting in the scad file that...
I am somewhat concerned with power consumption given that each sensor seems to consume around 4-6mA. I wonder if it would be possible to turn on hall effect sensors cluster-by-cluster...
I use an ergo keyboard, the Kinesis Essential. It has two flat mini-keyboards (ctrl/alt/backspace/delete/home/end) and (alt/ctrl/space/enter/pageup/pagedown), and two dished keyboards. Frankly, dishing and PCBs are incompatible .... _until now_! If...
What I noticed is the friction with resin prints. First I decreased the diameter of the stem and I glued a layer of teflon tape onto the stem. Then I...
Hello and thank you very much for your work, honestly it's brilliant! Since not many people have access to PCB manufacturing / KiCad skills or want to make something like...
I've actually printed a fair few of these and I'm loving them, but I have a question regarding the layer height recommendation since I've been post-processing them and wanted to...
