Chris Blake

Connection timeout is a good sign your provider is filtering/blocking telnet. Can you manually telnet to 64.233.188.27 from your docker host? If not, you will need to reach out to...

Connection timeout is a good sign your provider is filtering/blocking telnet. Can you manually telnet to 64.233.185.26 from your docker host? If not, you will need to reach out to...

I have found if you are hitting the endpoint too often it will fail to grab active alerts. Personally adding a 5 second sleep seems to work best in my...

@Ordspilleren best thing to do at this point is to request the latest u-boot GPL source from Meraki. This should hopefully show us what `Blowing fuses... Resetting now.` actually does...

@R1MnTnA Sadly nothing in https://github.com/syscl/XPS9350-macOS/issues/33 helps. This issue occurs when the device is booted with the adapter, or when it's hot-plugged. Either way, it fails to display on my display.

@R1MnTnA I have no issues trying another adapter, but I can confirm this adapter does work with Linux and Windows without issue. With that said, are there any recommendations on...

@R1MnTnA I will wait for it to be in stock and then see if that adapter gives me any better luck. With that said, as mentioned earlier the adapter works...

@syscl Thanks, for me this change has resolved my issue! 👍

@bozma88 Hotplug with my USB-C to Displayport adapter is working fine. If you are asking about Hotplug with USB-C devices, such as my Dell D200 adapter, that still does not...

@syscl The original issue in the OP, so my USB-C to DisplayPort adapter is now working with my monitor, and it supports hotplug.