sensor_config
sensor_config copied to clipboard
ASRock X470 Taichi
Hi. I just wanted to check if the ASRock X470 Taichi Ultimate file could be used accurately with a X470 Taichi Mobo? I tried with the Taichi Ultimate file on my X470 Taichi and see that some temps are still reported as -62.5 C etc. Below is the output of sensors.
mdgpu-pci-3000
Adapter: PCI adapter
vddgfx: +1.20 V
fan1: 856 RPM (min = 400 RPM, max = 4900 RPM)
temp1: +75.0°C (crit = +91.0°C, hyst = -273.1°C)
power1: 37.00 W (cap = 220.00 W)
k10temp-pci-00c3
Adapter: PCI adapter
Tdie: +34.8°C (high = +70.0°C)
Tctl: +44.8°C
nct6779-isa-0290
Adapter: ISA adapter
VRM VCore: +1.39 V (min = +0.00 V, max = +3.49 V)
VPPM: +2.54 V (min = +0.00 V, max = +0.00 V) ALARM
AVCC: +3.31 V (min = +2.98 V, max = +3.63 V)
3VCC: +3.31 V (min = +2.98 V, max = +3.63 V)
+12V: +12.25 V (min = +0.00 V, max = +0.00 V) ALARM
VDDCR_SOC (Data Fabric): +1.10 V (min = +0.00 V, max = +0.00 V) ALARM
DRAM (VDDIO): +1.37 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: +3.39 V (min = +2.98 V, max = +3.63 V)
VBat: +3.23 V (min = +2.70 V, max = +3.63 V)
Null: +0.00 V (min = +0.00 V, max = +0.00 V)
Mem_VTT (VDDIO/2): +0.78 V (min = +0.00 V, max = +0.00 V) ALARM
Chipset 1.05V: +1.07 V (min = +0.00 V, max = +0.00 V) ALARM
+5V: +5.04 V (min = +0.00 V, max = +0.00 V) ALARM
VDDP: +0.93 V (min = +0.00 V, max = +0.00 V) ALARM
1.8V+: +1.82 V (min = +0.00 V, max = +0.00 V) ALARM
Chassis Fan 3 Speed: 879 RPM (min = 0 RPM)
CPU Fan 1 Speed: 2048 RPM (min = 0 RPM)
CPU Fan 2 Speed: 0 RPM (min = 0 RPM)
Chassis Fan 1 Speed: 642 RPM (min = 0 RPM)
Chassis Fan 2 Speed: 0 RPM (min = 0 RPM)
Motherboard: +40.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor
CPU MB: -62.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
Auxillary: +7.0°C sensor = thermistor
VRM: +38.0°C sensor = thermistor
AUXTIN2: +22.0°C sensor = thermistor
CPU (PECI): -25.0°C sensor = thermistor
CPU tCTL (offset included): +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
PCH_MCH_TEMP: +0.0°C
beep_enable: disabled
Please let me know if you need any more information from my side
This is presently not something that can be resolved with a config file. The negative readouts are due to a bug/missing feature in the nct6779 kernel module.
Thanks for this rigred, the provided configs helped a lot for an ASRock B450 Pro4. I too have the negative values for temp2. Do you know what the bug/missing feature is? Or just that it isn't a config thing? I have done minimal kernel dev work before (on lm_sensors too) so could have a look into it. Scanning the data sheet the only thing I could see is the various modes for reading diode rather than thermocouple temperatures.