Programmed microdia foot perdal suddenly not working on kubunt precise

[ccinbrasi]

Hi,

I successfully programmed my 3-pedal footpedal and it worked. However, I hadn't used it for about 3 months and decided to used it yesterday. When I try to use the middle peddle i.e. pedal 2, I am getting no response.

I checked the settings using footswitch -r, and it correctly says it is programmed for alt o. However when I press it nothing happen.

Not sure why??

Any ideas?

Kind regards,

Carol

[rgerganov]

Hi Carol,

I am not sure what could be the problem given that 'footswitch -r' returns the correct value. What happens if you try to re-program it to something else other than Alt+o? If the other pedals work fine maybe it's a hardware problem ...

On Jun 6, 2013, at 1:56 PM, ccinbrasi [email protected] wrote:

Hi,

I successfully programmed my 3-pedal footpedal and it worked. However, I hadn't used it for about 3 months and decided to used it yesterday. When I try to use the middle peddle i.e. pedal 2, I am getting no response.

I checked the settings using footswitch -r, and it correctly says it is programmed for alt o. However when I press it nothing happen.

Not sure why??

Any ideas?

Kind regards,

Carol

— Reply to this email directly or view it on GitHub.

[ccinbrasi]

Hi Radoslav,

Thank you for your response. Yes, I tried programming it with other values and changing the values of the other pedals, however and they all stopped working. As you say it may be a hardware problem. I will test in in a windows environment also.

Kind regards,

Carol

---

From: Radoslav Gerganov [mailto:[email protected]] Sent: 07 June 2013 08:53 To: rgerganov/footswitch Cc: ccinbrasi Subject: Re: [footswitch] Programmed microdia foot perdal suddenly not working on kubunt precise (#3)

Hi Carol,

I am not sure what could be the problem given that 'footswitch -r' returns the correct value. What happens if you try to re-program it to something else other than Alt+o? If the other pedals work fine maybe it's a hardware problem ...

On Jun 6, 2013, at 1:56 PM, ccinbrasi [email protected] wrote:

Hi,

I successfully programmed my 3-pedal footpedal and it worked. However, I hadn't used it for about 3 months and decided to used it yesterday. When I try to use the middle peddle i.e. pedal 2, I am getting no response.

I checked the settings using footswitch -r, and it correctly says it is programmed for alt o. However when I press it nothing happen.

Not sure why??

Any ideas?

Kind regards,

Carol

Reply to this email directly or view it on GitHub.

Reply to this email directly or view https://github.com/rgerganov/footswitch/issues/3#issuecomment-19093628 it on GitHub. <https://github.com/notifications/beacon/18DKA_A-N-tf_1ph3zlkIdRvNyT4RfxJfoq 3V95dnY-ELaojo4D4y_JHJtOQGcrI.gif>

---

No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2904 / Virus Database: 3184/6387 - Release Date: 06/05/13