Richard Waltman

Analog read values only range from 0 to 1024! This is an easy fix.

I am experiencing this issue also when using the wifi shield with 8 channels and using two separate batteries (4xAA and 3.7v 500mah). ![screen shot 2018-04-12 at 5 50 54...

The WiFi shield firmware is v2.0.5 . Updated the Cyton firmware this morning and still having same problem: 

I've mostly been using TCP. I did swap out the WiFi shield for a Daisy header and **was able to see proper EEG over BLE using the dongle.** I'll try...

To document: I'm using a current generation Airport Extreme mounted high on the wall. The LOS distance from the Airport to the WiFi shield was about 5 feet. Had to...

This issue is still happening over UDP, rendering the WiFi shield unusable. Was not able to find the shield using WiFi direct in the GUI. ![screen shot 2018-04-14 at 1...

I erased the network credentials again, got 10 blinks in 2 seconds on boot, and connected to the Wifi shield. The GUI still only finds this: ![screen shot 2018-04-14 at...

Using OpenBCI_GUI 3.2.0 standalone on Mac

@aj-ptw What settings (hardware and software, apart from up-to-date firmware) would you recommend to resolve this issue? I was looking forward to the increased resolution over WiFi, but I get...

 I think I have to try and update the Cyton firmware again. I'm **having serious issues over BLE also.** Here we have...